SWISSPACER: pressure equalisation in insulated glass units

SWISSPACER completes its service for the SWISSPACER Air

© SWISSPACER

SWISSPACER, the Swiss specialist for “Warm Edge” spacer bars, is expanding the scope of service of CALUWIN.

Using the tried-and-tested online tool, manufacturers of insulated glass units and window makers now have a very easy way to check whether the use of SWISSPACER Air is able to achieve the pressure equalisation required to avoid the damage caused by climatic loads – fully tailored to specific insulated glass units and for underlying conditions such as climatic zones and height differences during transport.

The digital solution also makes it possible to determine whether the planned insulated glass units will achieve a service life of more than fifteen years as required by DIN EN 1279-2 “Glass in building”.

© SWISSPACER

“Manufacturers of insulated glass units and window makers can perform their own feasibility analysis with the new tool,” said Rutger van Eijk, Sales Director Europe at SWISSPACER, explaining the advantages. He continued, “Should it not be possible to use SWISSPACER Air to equalise the pressure, then alternatives can be simulated. So in this case, too, we can find a solution together with the customer.”

The online tool is very easy to use. Processors enter the required parameters into a selection screen. These include the type and coating of the glass, double or triple glazing, the size of the cavity and the dimensions of the unit. While performing the calculation, the application takes into consideration both the maximum height difference between production and installation location and the respective climatic zone.

© SWISSPACER

“Thanks to the new tool, manufacturers of insulated glass units and window makers no longer have to rely on the ‘trial and error’ approach. They now have a safe calculation basis available to them for the planning process,” Eijk summarised the main advantage of the CALUWIN extension.

The calculation is based on current regulations such as TRLV (Technical Rules for the Use of Glazing on Linear Supports), prEN 16612:2017 (basis of assessment for the mechanical and thermal properties of triple glazing units), DIN EN 673 for determining the temperature in the cavity between the panes and DIN EN 1279-2 for calculating the expected service life.

CALUWIN is available online and as an app for iOS and Android devices in the respective app stores.