Tests by ift Rosenheim are recognized in the USA and Canada

Tests according to standards NAFS, CSA and AAMA at ift Rosenheim facilitates market access for window and door manufacturers

An additional test according to NAFS (North American Fenestration Standard) is the so-called deglazing test to test the usability, e.g. of sliding doors - Source ift Rosenheim

Recently, ift Rosenheim has been conducting tests on windows and doors according to NAFS (North American Fenestration Standard). In cooperation with its partner UL (Underwriter Laboratories Inc.), ift Rosenheim coordinates the required test specimens and test matrix with the client. Then, the tests take place at ift Rosenheim in Germany.

The manufacturer can have both preliminary and main tests carried out. The tests or the test reports are recognized on the American and Canadian markets. This facilitates market access for manufacturers from Germany and Europe and saves time and money, as there are no overseas travel and transport costs.

The calibration of the water spray system according to ASTM E 331 with the help of the so-called Catch-Boxes is important before testing the watertightness according to NAFS – Source ift Rosenheim

Modern windows, doors and facades from Germany and Europe enjoy a very good reputation in the US and Canada, especially in terms of quality and energy efficiency. This means that there are good market opportunities for the energetic optimisation of buildings in North America. However, the approval process and the performance of tests are costly and lengthy. As products used in public buildings, in the commercial as well as in the private sector in the US and Canada are subject to strict and complex specifications. For example, manufacturers must test, classify and label their windows and doors according to NAFS to gain access to the American and Canadian market.

For a construction project in New York, Josko Fenster und Türen GmbH had its wood/aluminum windows successfully tested for tightness and mechanical durability according to NAFS at ift Rosenheim – Source Panoramic European Windows

All NAFS tests required for labelling or certification shall be performed only at an AAMA (American Architectural Manufacturers Association) approved and/or certification body listed testing body.

In collaboration with its cooperation partner UL – an AAMA-approved testing and certification body – ift Rosenheim can offer the necessary verification and certificates for the US and for Canada. For European manufacturers, this means that the tests can be carried out at ift Rosenheim. As an additional service, ift Rosenheim supports clients in the run-up to testing with the selection of test specimens and the coordination of the required test program.

The advantages of this are obvious: preliminary tests within the system developments or on project-specific special constructions can be carried out in Germany; ift Rosenheim takes over the coordination with UL, so that the client has only one contact for the project handling. The enormous time and financial effort required to carry out tests directly in North America, including transport costs for the test specimens and travel expenses for the employees, is thus largely eliminated. Upon request, site inspections required for construction projects in the US and Canada can be organized and handled through UL.

If special or additional tests are required for certification or recognition, ift Rosenheim will also coordinate these requirements and any necessary tests with UL. “We have already implemented this test processing of short paths for specific test objects, where the companies have particularly appreciated the uncomplicated handling and the time as well as financial advantage,” said Dirk Köberle (ift Product Manager Facade).