Page 34 - Glass Machinery Plants & Accessories no. 6-2019

IS MACHINES

IS machines

the operating state.
Thereafter, the
interval begins to
count again, until
re-lubrication of
the blanks or neck-
rings is displayed
again.

WHICH IS
MACHINES CAN
BE EQUIPPED
WITH STATUS
LIGHTING?
Coloured RGB
status lighting
with white lighting
option is available
for all SpeedLine
IS machines that
are equipped with
equipment’s lubrication (swab- WHICH LUBRICATION modern machine control and
bing) cycle. PERIODS CAN BE SELECTED? HMST control.
Effectively, the lighting is The ‘lubrication cycle’ func- Via this added safety bene-
mounted in the blank side con- tion gives the operator addi- fit, the operator has access to
trol panel and in its simplest form tional support when carrying out another useful tool to support
(white light only), illuminates the daily work routines. By blink- daily work routines in a simple
section for work that needs to be ing in an assigned colour, the way. Furthermore, by maintain-
undertaken there, including job function shows that the lubri- ing a regular lubrication interval,
changes, equipment exchanges cation of the blank and/or the optimum mould lifetime is guar-
etc. Initially, the coloured RGB neckring is necessary after a anteed. Q
status lighting with an option for defined time interval. The
white lighting took into account time interval can be stored in
the opportunity to increase oper- the HMST (Heye Modular
ator safety. With the coloured Servo Technology) control,
lighting, the operator can visually either in the form of minutes or
identify the different operating after a certain number of pro-
states of the machine/section. cessed gobs.
Without illumination, the sec-
tion is in normal production mode. CAN SWABBING OF
By a further defined assignment NECKRINGS BE INDICATED
of different colours, the operator SEPARATELY?
is shown further possible operat- The necessary swabbing of
ing states. This includes: both the blank mould and neck-
• Section stop activated. ring is indicated to the opera-
• Start phase (reset actuated). tor by a colour-coded light that
• Start up and operation without flashes in each station. Flashing
gobs. frequency increases as the speci- HEYE INTERNATIONAL
• Special ‘cold blank mould’ pro- fied interval is exceeded. GMBH
gramme. The flashing is stopped by
• No communication between the operator pressing the ‘blank Lohplatz 1 - 31683 Obernkirchen - Germany
Tel.: +49 - 5724 - 26452
status lighting and control lubricating’ button, before lubri- Fax: +49 - 5724 - 26229
(failure). cating the blank mould and/or the E-mail: marketing@heye-international.com
• Special ‘lubrication cycle’ pro- neckring and pressing the button www.heye-international.com
gramme. again, returning the station to

32 glass machinery plants & accessories 6/2019