Page 135 - GTI_2018_5

2
possibility of self-regulate the peripheral wheel operating pressure. DFN632 –
The coating removal speed can be set according to the type of Desiccant Filling
coating to be removed, the type of abrasive wheels used and their Machine
degree of wear. The desiccant filling
With square or rectangular pieces, the Art. CRP can work machine Art. DFN632
automatically by acquiring the sheet dimensions and thickness through allows to automatically
a series of specific sensors. fill the profile frames with
hygroscopic material in order
PBA632 – Profile Bending Machine to prevent the formation of Forel SpA
The Art. PBA632 is equipped with the special Smart Arm condensation inside the insulating
(patented by Forel), which accompanies and supports the spacer glass panel. This solution consists
during bending operations. of a turret on which a frame-
In fact, the Smart Arm reduces to the minimum any risk of profile pressing vice and two special
deformation or breakage, even when processing oversized spacers, drilling and filling heads are Via per Monastier 4 - 31056
thus ensuring safe processing and high productivity. installed. After drilling the frame, Vallio di Roncade, Treviso - Italy
Furthermore, the machine has been recently upgraded with a specific using two drills positioned at Tel.: +39 39 0422 840507
device for plastic profile bending. 90° from each other, the drying Fax: +39 0422 840900
The Art. PBA632 can carry out the classic internal bend or an material is inserted by a jet of E-mail: info@forelspa.com
internal bend at 90°, aesthetically identical to the welding joint or the compressed air. Once the filling www.forelspa.com
corner bracket (corner keys), but with production times lower than is complete, the two holes are
the former and without the heat loss typical of the latter. sealed using butyl.

Glass-Technology International 5/2018 131