Schott supplies Zerodur mirror substrate for India“s largest astronomical telescope

The Aryabhatta Research Institute of Observational Sciences (ARIES) is, says its director, Professor Ram Sagar, planning to build India“s largest optical astronomy telescope in Devasthal, in the Nain…

The Aryabhatta Research Institute of Observational Sciences (ARIES) is, says its director, Professor Ram Sagar, planning to build India“s largest optical astronomy telescope in Devasthal, in the Naini Valley between the slopes of the Himalaya Mountains. It is scheduled to go into operation in 2012 and has been optimized for the spectroscopic exploration of the Milky Way. By observing the colour spectrum of the light sources, one can determine physicochemical processes, as well as the internal structure or the temperature of the celestial bodies, Prof. Sagar explains. The incredibly clear sky reflects off of the droplet-shaped lake. Hindu mythology says that “Nain“, the eye of the divine Sati, fell down to the ground here. Nevertheless, it isn“t mythology that focuses on here, but rather what is happening outside our world.” The telescope is equipped with a 3.7-metre mirror made of Zerodur from SCHOTT. Zerodur is a glass ceramic that is particularly known for its coefficient of thermal expansion that is close to zero. This prevents deviations from occurring while measuring the sky, as a result of shifts in temperature. Additionally, this material features extremely high homogeneity, chemical stability and excellent long-term stability of the mechanical properties. For this reason, Zerodur from SCHOTT is the mirror substrate material that is used in most of the world“s large telescopes. The high quality of the mirror material is of immense importance for a telescope of this size, explains Frdric Rausin, project manager at AMOS S.A. Advanced Mechanical and Optical Systems in Lige (Belgium). Besides, the fact that SCHOTT has so many years of experience with major astronomy projects was of great benefit. This made it possible to complete the extensive processing of the mirror substrate for the active optics of the mirror that significantly improves the image sharpness of the telescope in a very short time, he adds. In order to be able to take on the 69 actuators – machines similar to a mechanical muscle – of the active optics, pockets with extremely narrow tolerances were integrated into the back side of the mirror substrate, explains Dr. Thorsten Dhring, an expert on astronomy projects at SCHOTT Advanced Optics in Mainz (Germany). Now, the mirror can be adjusted in the nanometer region at these points. This allows for the bending of the mirror that is caused by gravity to be compensated for while tracking the telescope, Dhring adds. SCHOTT received the order to provide and process the Zerodur substrate from AMOS, the general contractor, in September 2008. Only a few months later, in March 2009, the glass ceramic monolith was delivered to the polisher as a heavy load. Once it has been completed, the eye on the sky will be sent to Lige (Belgium), where the specialist for opto-mechanical systems AMOS will complete assembly and perform extensive tests. As soon as these have been concluded, the entire system – 13 metres high and around 120 tons in weight – will be dismantled into modules of 15 tons each. Then, they will begin their long voyage to the Himalayas by heavy transport in order to be able to follow Sati“s view of the sky starting in 2012.