AAMA releases new specification for blast mitigation

  Representative organizations

The American Architectural Manufacturers Association has released a voluntary guide specification for blast hazard mitigation for vertical fenestration systems.

AAMA510blasttest
The document incorporates best practices and accepted test standards
The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems, which provides a guide to manufacturers, architects/specifiers, contractors and building owners for specifying these types of systems and services to meet the requirements of blast hazard mitigation.
Blast mitigation products are intended for the reduction of injuries and fatalities of occupants under defined blast criteria. The method of installing these products is as important as the product itself, and must be evaluated during testing and/or structural analysis.
“Unlike most AAMA documents, this one is primarily designed to be a roadmap for architects to use as a reference guide and format for specifying hazard mitigation products,” says Dennis Kelly (Graham Architectural Products), Chair of the Security Hazard Mitigation for Fenestration Products Committee.
This document was last updated in 2006. It was developed in cooperation with several government and industry groups over the course of a few years, to incorporate the best practices and accepted test standards, Kelly adds.
“A very important use of this significant document is that, if the procedure in the document is followed and the laboratory is accredited as noted in the document, the specifier can be confident that the product he or she is specifying when tested in accordance with the stipulated procedures can be matched to other produ...
expand

Channel: Representative organizations

273 Total news items for this channel since 1996
Next »
Page  1 2 3 4 5 6 7 of 7 
latest Order by:

GlassOnline News by Channel

FlatGlassCulletjpg350x350

2017-11-08
A workshop organized by British Glass and Zero Waste Scotland, explored how flat glass recycling can be increased to...

Logotransparentcopy

2017-10-31
Egbert Wenninger will head the VDMA Glass Technology Forum for a period of three years in an honorary capacity, taking...

Unnamed

2017-10-24
Glass for Europe has officially launched its new structure enlarged to European representatives of building glass...

Download

2017-10-13
Glass for Europe's members are pleased about the positive signal regarding the start of the debate on an EPBD reform...

ACerSLogo

2017-10-06
Technical program provides open forum for glass scientists and engineers from around the world

Ngaganalogos

2017-10-06
Association leaders share outline for the approaching merger

Luxepack

2017-09-27
During next week’s Luxepack Monaco 2017, FEVE member companies will present recently launched or launching products w...

GMICtumbnaillandscapecopy

2017-09-25
GMIC and CGIF have both received grants to support CGIF outreach programmes and provide travel grants to college-age...

Laminatedglass

2017-09-19
The NGA and GANA associations have unanimously approved combining the associations into one unified voice for the glass...

NationalGlassGroupWelcomesLatestMember

2017-09-18
IGU manufacturer Nova Group Limited joins the NGG

FriendsofGlassprank

2017-09-14
Singing bottles prank leads to confusion, amusement, and ultimately to education

Ngaganalogos

2017-09-13
Unification process is expected to commence late in 2017 or early in 2018

Vitrum

2017-09-04
Seminar will help attendants discover all the opportunities offered by the Industry 4.0 Plan to the Italian market at...

Pieceinprintcloseupcrop

2017-08-29
British Glass technical director Dr Nick Kirk has responded to a recent article published by BBC Good Food magazine...

Static1

2017-08-25
The Glass Futures project has and is receiving so much interest from industry, academia and other interested groups...

20141124044509Gimavlogo

2017-08-24
GIMAV will be at GlassBuild America with a key contingent of Italy’s glass processing machinery businesses.

2017-08-23
In a statement to reassure GGF Members and related stakeholders that the GGF and its group of subsidiary companies are...

2017-07-18
The 12th annual Glazing Executives Forum will be held September 12 at GlassBuild America.

Glassforeurope

2017-07-03
Bertrand Cazes, Secretary General of Glass for Europe gave the association’s reaction to the EU Council General a...

Midatlanticglass

2017-06-27
The AAMA has released a new white paper covering the use of aluminum in high-performing building enclosures.

2017-06-20
This year FEVE celebrates its 40th anniversary, while electing its executive team for the 2017-2019 term of office.

20160905030029glassbuildimg

2017-06-19
Industry volunteers from the glass industry will meet for the GANA Fall Conference at GlassBuild America in...

Thumb

2017-06-08
The Glass and Glazing Federation took part in the recently-held FIT Show, where almost 10,000 visitors and over 250...

Gimav

2017-05-31
The interest stimulated by the GIMAV Group validates the upward trend experienced by Italy’s glass processing i...

Isologocopy

2017-05-26
ISO has published a standard that specifies a method to measure the solar heat gain coefficient (SHGC) of complete...

Glassandglazing

2017-05-22
A new study commissioned by Glass for Europe to ECOFYS provides a clear picture of the minimum requirements for window...

Gimavlogo

2017-05-18
The GIMAV group stand at China Glass 2017 in Beijing will showcase Italian excellence in glass processing.

NGAGANA

2017-03-16
Industry volunteers explore combining the two associations into one stronger, unified voice.

Britishglass

2016-07-04
British Glass has announced that it will continue to support and work with its members to secure a sustainable future.

2016-07-01
Germany’s mechanical engineers are discussing the UK’s decision to leave the European Union while the VDMA fears a loss ...

2015-06-17
IGMA has released a new Vacuum Insulating Glass Technical Bulletin intended to assist residential or commercial...

Floatglass

2015-05-27
Glass for Europe, the trade association of Europe’ manufacturers of building, automotive and solar-energy glass, has l...

2015-05-08
ICG has published a special edition of its R&D roadmap activities, which speaks about glass – a material that is at the ...

Glasspexgimav

2015-04-02
Italian companies present at Glasspex India as part of the Gimav group exhibition, reported that interest was high,...

2015-03-30
GTS has joined ICG’s technical committee (TC12) for pharmaceutical packaging, aimed at sharing aimed at working c...

Soundcontrol

2015-03-16
AAMA has updated its document about sound control for fenestration products. The document is a source of guidance and...

2015-03-11
FEVE has elected Vitaliano Torno, Managing Director, O-I Europe, as its new President, also electing Niall Wall, CEO...

2015-03-10
During GANA’s 2015 Annual Conference last week in Las Vegas, the Tempering Division meeting took place with an opening d...

Building300x199

2015-03-03
With the Energy Union framework strategy now released by the European Commission, Glass For Europe says it's now … “...

2015-02-24
During the Banquet of the 78th Annual AAMA Conference, members of the association were recognized for their...

Britishglass

2015-02-18
In its recently-launched manifesto, British Glass is calling upon the government to make a series of changes, proposing...

Gimav

2015-02-02
Member companies of Gimav, the Italian Association of manufacturers of machinery, accessories and special products for...

273 Total news items for this channel since 1996
Next »
Page  1 2 3 4 5 6 7 of 7 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Anniversary - Art & culture - Autoglass - Automation and it - Automotive glass - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Diamond Tools - Directives - Double glazing - Ecology - Edging - Energy saving - Events - Fibre treatment - Forming - Furnace technology - Glazing / Insulating Glass - Government - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Laminating - Legal news - Machinery developments - Manufacturing technology - Markets & trends - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Other news - Palletising/depalletising - People - Personnel & industrial relations - Photovoltaic glass - Plant technology - Printing and tempering - Processing - Product news - Production costs - Recycling - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Treatment plants - Tube production - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © A151 S.r.l. 1996-2017 - All rights reserved

A151 S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962