LiSEC revolutionizes handling system of IGUs with new logistics solution

  Ig equipment

LiSEC handling system of insulating glass units consisting of a gantry crane facility (UTS-B) and a mobile unit buffer (MEB-B).

Lisec
LiSEC's new logistics solution for handling systems of IGUs improves quality, saves time, resources and money
LiSEC, a pioneer in the development and manufacture of equipment and machinery for flat glass processing, has revolutionized logistical handling of insulating glass units due to a sophisticated handling system.
This logistics solution, which consists of a gantry crane facility (UTS-B) and a mobile unit buffer (MEB-B), improves quality, saves time, resources and money.
The automatic gantry crane facility (UTS-B), which is arranged downstream of a LiSEC sealing machine, is particularly suitable for unstacking of freshly sealed insulating glass units with fixed or flexible spacer systems, with particular advantage for thermoplastic spacers.
LiSEC handling system of insulating glass units consisting of a gantry crane facility (UTS-B) and a mobile unit buffer (MEB-B).
The glass units are sent out in the direction of the line and rotated from horizontal to upright position before being sorted into the mobile buffer system (MEB-B). The mobile unit buffer serves for manual or automatic unloading, curing and transporting of insulating glass units. Further re-sorting is therefore no longer necessary.
The production flow is significantly improved by automatic unloading and sorting. The insulating glass unit is removed from the suction plate without compressing it. Support fingers located at the bottom and side edges prevent the glass sheets from slipping. This guarantees compliance with quality and tolerances.
Fixation of glass sheets on the transport rack MEB-B takes place without...
expand

Channel: Ig equipment

21 Total news items for this channel since 1996
Page  1 of 1 
latest Order by:

GlassOnline News by Channel

Characterisationqualitycontrolmbeprocessesimage

2017-12-08
Hiden Analytical’s MBE process-specific technical information sheet includes prmary features of the new range of q...

ThermosealVitrum2017WO

2017-11-06
Thermoseal Group is due to showcase its Thermobar and Thermoflex spacer systems at two exhibitions in the Far East in...

EDGSchemaUK

2017-09-25
Aesthetical or functional? A spacer must meet both objectives when inserted into a demanding glass façade. The ...

Warmedgeprofilenew

2017-08-21
Thermoseal Group has released new editions of both its trade and warm edge consumer videos, reflecting the...

1607BAU2017G

2016-12-21
sedak equals oversize insulating and safety glass up to 16 m in premium quality. Since ‘big’ is not only a question of d...

Edgetech

2016-07-01
ESG’s second Super Spacer production line from Edgetech UK was officially opened recently by a local MP. As well as the ...

2016-03-10
The IGMA (the Insulating Glass Manufacturer’s Alliance) announced today a new event for the industry focusing on IG f...

Thermoseal

2015-06-19
Thermoseal has introduced a new advertising and promotional campaign to showcase its Thermobar and Thermoflex Warm Edge...

Thermoseal

2014-09-03
Thermoseal Group’s stand at glasstec will display ThermoBAR, a high performance warm edge spacer tube system, and FLEX i...

Thermoseal

2014-07-01
Thermoseal has announced that it has increased its production rate of its new warm edge spacer – Thermoflex – and now ha...

Thermoseal

2014-05-14
Glass Express Midlands has increased its capacity to gas-fill IG units thanks to the purchase of an additional NM2...

Thermobar

2014-04-03
Thermoseal Group has introduced two new sizes to its Thermobar warm edge range and now manufactures a full range of...

Glaco

2013-07-01
Graco’s new ExactaBlend AGP provides on-ratio mixing of plural-component sealants and adhesives for use in curtainwall, ...

Fenzi

2013-03-26
Thanks to its outstanding results in terms of pot life, thermal performance and long service life, Butylver TPS, the...

Tenon

2013-03-21
Thanks to its more than ten years of experience in the production of I.G. machinery, Tenon provides fully automated...

Bystronicglassspeedassembler

2013-01-21
Bystronic glass’ speed’line is able to produce triple insulating glass in the same time it takes other lines to produce ...

Thermoseal

2012-11-27
Thermoseal’s new Warm Edge Spacer Bar Bending Machine is, says Sales Director Mark Hickox, “for sealed unit man...

2012-11-07
The PPG Residential IG Service Center, which manufactures insulating glass (IG) units for use in residential windows...

PictBystronicglasscomfortline2

2012-03-08
"The great advantage of the comfort’line is its simple handling and the uncomplicated operator guidance," Bernhard S...

Bystronicchampspeed

2012-02-03
Bystronic glass will present two fast machines for glass processing at the upcoming edition of China Glass. The the...

21 Total news items for this channel since 1996
Page  1 of 1 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Anniversary - Art & culture - Autoglass - Automation and it - Automotive glass - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Diamond Tools - Directives - Double glazing - Ecology - Edging - Energy saving - Events - Fibre treatment - Forming - Furnace technology - Glazing / Insulating Glass - Government - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Laminating - Legal news - Machinery developments - Manufacturing technology - Markets & trends - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Other news - Palletising/depalletising - People - Personnel & industrial relations - Photovoltaic glass - Plant technology - Printing and tempering - Processing - Product news - Production costs - Recycling - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Treatment plants - Tube production - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © A151 S.r.l. 1996-2017 - All rights reserved

A151 S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962