Graco introduces advanced glazing proportioner for sealants and adhesives

  Ig equipment

Graco’s new ExactaBlend AGP provides on-ratio mixing of plural-component sealants and adhesives for use in curtainwall, insulating glass and other applications. The system is very easy to operate as it has controls that provide simple set up of ratios and also allow operators to make ratio changes on the fly.

Glaco
The ExactaBlend AGP is designed to solve the inherent challenges of on-ratio mixing for silicones
Graco Inc. is introducing the ExactaBlend™ AGP Advanced Glazing Proportioner. The ExactaBlend AGP is designed to solve the inherent challenges of on-ratio mixing for silicones that are often used in manufacturing curtainwall and insulating glass. The ExactaBlend AGP system provides optimal mixing and on-ratio proportioning capabilities that increase quality assurance of the final product. The system’s real-time ratio assurance also reduces material waste because the system automatically shuts down if off-ratio conditions occur.
“Accurate mixing of plural-component adhesive materials is vital in the creation of insulating glass units and curtainwall,” said Mike Cryer, Graco Product Marketing Manager. “Obtaining on-ratio mixing and dispensing for these applications has long proven to be a difficult industry challenge but the ExactaBlend AGP offers ratio assurance and is an affordable, high quality solution that offers attractive savings to the end user.”
In addition to the cost reduction and quality assurance benefits of the system, the ExactaBlend AGP is also very easy to operate. Compared to traditional proportioners with mechanical linkage and rocker arms, the unit’s electronic controls remove the guesswork from ratio setting and maintenance. The controls provide simple set up of ratios and also allow operators to make ratio changes on the fly.
With ExactaBlend’s optional data reporting capabilities, window manufacturers can track key information such as ratio, ma...


expand

Channel: Ig equipment

21 Total news items for this channel since 1996
Page  1 of 1 
latest Order by:

GlassOnline News by Channel

Characterisationqualitycontrolmbeprocessesimage

2017-12-08
Hiden Analytical’s MBE process-specific technical information sheet includes prmary features of the new range of q...

Lisec

2017-11-21
LiSEC handling system of insulating glass units consisting of a gantry crane facility (UTS-B) and a mobile unit buffer...

ThermosealVitrum2017WO

2017-11-06
Thermoseal Group is due to showcase its Thermobar and Thermoflex spacer systems at two exhibitions in the Far East in...

EDGSchemaUK

2017-09-25
Aesthetical or functional? A spacer must meet both objectives when inserted into a demanding glass façade. The ...

Warmedgeprofilenew

2017-08-21
Thermoseal Group has released new editions of both its trade and warm edge consumer videos, reflecting the...

1607BAU2017G

2016-12-21
sedak equals oversize insulating and safety glass up to 16 m in premium quality. Since ‘big’ is not only a question of d...

Edgetech

2016-07-01
ESG’s second Super Spacer production line from Edgetech UK was officially opened recently by a local MP. As well as the ...

2016-03-10
The IGMA (the Insulating Glass Manufacturer’s Alliance) announced today a new event for the industry focusing on IG f...

Thermoseal

2015-06-19
Thermoseal has introduced a new advertising and promotional campaign to showcase its Thermobar and Thermoflex Warm Edge...

Thermoseal

2014-09-03
Thermoseal Group’s stand at glasstec will display ThermoBAR, a high performance warm edge spacer tube system, and FLEX i...

Thermoseal

2014-07-01
Thermoseal has announced that it has increased its production rate of its new warm edge spacer – Thermoflex – and now ha...

Thermoseal

2014-05-14
Glass Express Midlands has increased its capacity to gas-fill IG units thanks to the purchase of an additional NM2...

Thermobar

2014-04-03
Thermoseal Group has introduced two new sizes to its Thermobar warm edge range and now manufactures a full range of...

Fenzi

2013-03-26
Thanks to its outstanding results in terms of pot life, thermal performance and long service life, Butylver TPS, the...

Tenon

2013-03-21
Thanks to its more than ten years of experience in the production of I.G. machinery, Tenon provides fully automated...

Bystronicglassspeedassembler

2013-01-21
Bystronic glass’ speed’line is able to produce triple insulating glass in the same time it takes other lines to produce ...

Thermoseal

2012-11-27
Thermoseal’s new Warm Edge Spacer Bar Bending Machine is, says Sales Director Mark Hickox, “for sealed unit man...

2012-11-07
The PPG Residential IG Service Center, which manufactures insulating glass (IG) units for use in residential windows...

PictBystronicglasscomfortline2

2012-03-08
"The great advantage of the comfort’line is its simple handling and the uncomplicated operator guidance," Bernhard S...

Bystronicchampspeed

2012-02-03
Bystronic glass will present two fast machines for glass processing at the upcoming edition of China Glass. The the...

21 Total news items for this channel since 1996
Page  1 of 1 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Anniversary - Art & culture - Autoglass - Automation and it - Automotive glass - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Diamond Tools - Directives - Double glazing - Ecology - Edging - Energy saving - Events - Fibre treatment - Forming - Furnace technology - Glazing / Insulating Glass - Government - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Laminating - Legal news - Machinery developments - Manufacturing technology - Markets & trends - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Other news - Palletising/depalletising - People - Personnel & industrial relations - Photovoltaic glass - Plant technology - Printing and tempering - Processing - Product news - Production costs - Recycling - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Treatment plants - Tube production - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © A151 S.r.l. 1996-2017 - All rights reserved

A151 S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962