Thermoseal Group: new warm edge spacer bar bending machine

  Ig equipment

Thermoseal’s new Warm Edge Spacer Bar Bending Machine is, says Sales Director Mark Hickox, “for sealed unit manufacturers looking to save costs on their insulated glass components.”

Thermoseal
Thermoseal's new Warm Edge Spacer Bar Bending Machine has been designed for bending PVC or PP spacer bars
The new Warm Edge Spacer Bar Bending Machine from Thermoseal Group helps sealed unit manufacturers working with warm edge spacer tubes to make significant savings by dramatically reducing corner key costs.
The new machine is part of a superior range of machinery available from TGE (Thermoseal Glass Equipment), and has been designed for bending PVC or PP spacer bars (such as Thermobar or Thermobar LITE) using an automatic temperature controlled bending process. The machine is also suitable for bending stainless steel, aluminium, or composite bar (such as Thermix-TX.N).
Mark Hickox, Sales Director at Thermoseal Group, says “Our New Warm Edge Spacer Bar Bending Machine is for sealed unit manufacturers looking to save costs on their insulated glass components. Although some investment is required for initial purchase, this machine can pay for itself in corner key cost savings alone.”
“The Warm Edge Bending Machine is an efficient addition to any warm edge sealed unit production line as it boasts: a fully automatic bending process of three or four corners of the unit; a simple user interface with SPS control and touch screen display; quick adjustment for different spacer heights and widths; and a production speed of 20-60 seconds per frame depending on the material and speed of the operator. Delivered and installed from as little as GBP 50k, this machine has a cycle time that is the same or better than competitors’ machines that cost up to four times as much.”

Channel: Ig equipment

15 Total news items for this channel since 1996
Page  1 of 1 
latest Order by:

GlassOnline News by Channel

Edgetech

2016-07-01
ESG’s second Super Spacer production line from Edgetech UK was officially opened recently by a local MP. As well as the ...

2016-03-10
The IGMA (the Insulating Glass Manufacturer’s Alliance) announced today a new event for the industry focusing on IG f...

Thermoseal

2015-06-19
Thermoseal has introduced a new advertising and promotional campaign to showcase its Thermobar and Thermoflex Warm Edge...

Thermoseal

2014-09-03
Thermoseal Group’s stand at glasstec will display ThermoBAR, a high performance warm edge spacer tube system, and FLEX i...

Thermoseal

2014-07-01
Thermoseal has announced that it has increased its production rate of its new warm edge spacer – Thermoflex – and now ha...

Thermoseal

2014-05-14
Glass Express Midlands has increased its capacity to gas-fill IG units thanks to the purchase of an additional NM2...

Thermobar

2014-04-03
Thermoseal Group has introduced two new sizes to its Thermobar warm edge range and now manufactures a full range of...

Glaco

2013-07-01
Graco’s new ExactaBlend AGP provides on-ratio mixing of plural-component sealants and adhesives for use in curtainwall, ...

Fenzi

2013-03-26
Thanks to its outstanding results in terms of pot life, thermal performance and long service life, Butylver TPS, the...

Tenon

2013-03-21
Thanks to its more than ten years of experience in the production of I.G. machinery, Tenon provides fully automated...

Bystronicglassspeedassembler

2013-01-21
Bystronic glass’ speed’line is able to produce triple insulating glass in the same time it takes other lines to produce ...

2012-11-07
The PPG Residential IG Service Center, which manufactures insulating glass (IG) units for use in residential windows...

PictBystronicglasscomfortline2

2012-03-08
"The great advantage of the comfort’line is its simple handling and the uncomplicated operator guidance," Bernhard S...

Bystronicchampspeed

2012-02-03
Bystronic glass will present two fast machines for glass processing at the upcoming edition of China Glass. The the...

15 Total news items for this channel since 1996
Page  1 of 1 

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962