Channel: Product news
Prodim: measurement made portable

2012-08-06 | Product news

With a name that stands for Production Improvement, Prodim does just that. This Netherlands-based firm has, since its founding in 1995, been dedicated to improving and facilitating production processors. This article present the company, as well as introducing its most recent development – the Prodim Unfold 2012.

The Proliner enables to measure in all kinds of situations, both prototyping or digitizing templates in factories as well as directly on job sites
The company and the Prodim Principle
Prodim focuses on creating complete industry solutions; automation, from dimensional capturing to fabrication.
Since 1995, Prodim has been dedicated to improving and facilitating production processes for fabricators around the world with the Proliner Principle.
Prodim, which stands for Production Improvement, focuses on providing full industry solutions. Prodim aims to greatly simplify processes through use of 2D or 3D digital measurement methods and, where needed, in combination with added software.
Prodim International is the manufacturer of revolutionary 2D and 3D portable measurement solutions with the Proliner® principle; measuring with a wire. The wire-based principle of the Proliner has a base accuracy which can reach up to 0.3 millimetres (0.01 inch).
The Proliner systems are the fastest and easiest way for obtaining accurate dimensions on site, as well as digitizing existing shapes and objects.

The glass industry and its requirements
Accurate measurements are very important in the glass industry to avoid expensive waste. Traditional methods imply a great loss of time, effort and often precision. Large amounts of cut glass for windshields are frequently wasted due to inaccurate measurements.
The Proliner enables to measure in all kinds of situations, both prototyping or digitizing templates in factories as well as directly on job sites.
The Proliner can serve companies working with flat glass, dealing with, for example: door and windows ...









expand

Article taken from Glass-Technology International bi-monthly magazine (6 issues per year)
Year: 2012 number: 2
Check out Glass-Technology International magazine

Product news
31 Total results
Next »
Page  1 2 of 2 
latestOrder by:

GlassOnline Articles by Channel

Italcarrelligti315

2015-06-20
This article gives us a short – but extremely detailed – overview of how Italcarrelli is maintaining its position of glo...

VMAgm215

2015-04-20
In this article, VMA gives us the basic ideas as to why its TMC system – now improved and bearing the ‘FLX’ brand – is ...

Pneumoforegm115

2015-02-20
Rotary vane technology finds its applications in vacuum pumps and air compressors to cover the pneumatic requirements...

EuroglasGTI614

2014-12-20
Euroglas – partnerships in glass Euroglas was created in 1993 as an association of five independent medium-sized glass p...

Ocmigm614

2014-12-20
Camera control systems developed by OCMI for tube forming machines reduce glass waste, keep the sizes of glass...

Zecchettigm614

2014-12-20
With glasstec now past and counted as a success, the Zecchetti RBR T-PAL line shown at the exhibition will be...

PomdiGTI514

2014-10-20
POMDI continues to innovate its products each year, without forgetting the development of special concepts with its...

ProdimGTI514

2014-10-20
In today’s industrial world – evermore technological and intense – finding a ‘unique, digital measuring device’ that can...

CassoSolargti314

2014-06-20
Architects and interior designers are rapidly changing the way interiors and exteriors of buildings look by...

Prodimgti214

2014-04-20
Prodim is the manufacturer of revolutionary 2D and 3D portable measuring solutions. Prodim continuously follows...

PRSgm214

2014-04-20
Precise forehearth and distributor temperature control is essential if consistent feeder operation and efficient...

HeyeGM116

2014-02-20
According to Wilfried Seidensticker and Mark Ziegler, leading breweries benefit from the advantages of the Heye Process...

Zafferanigti313

2013-12-20
At the recent Vitrm trade fair, we had the chance to speak to the Managing Director of Zafferani Glas, Andrea...

Stoneglassgti313

2013-12-20
During Vitrum 2013, Glass-Technology International spoke to Marco Pietroni, the Sole Director of Arcom Srl, the Italian...

Pomdigti513

2013-10-20
Being able to follow the market needs and demands with continuously evolving and technologically-advanced products – t...

Heglagti513

2013-10-20
This year’s edition of Vitrum, to take place 23 to 26 October in Milan, northern Italy, will, once again, be an o...

31 Total results
Next »
Page  1 2 of 2 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962