Channel: Mould technology
Traditions meets High-Tech

2010-01-01 | Mould technology

Giancarlo Perego, present on the market for 47 years, has continued to grow and develop it products – high quality moulds and accessories. Now preparing for the automation of its production line, the company has never forgotten or put aside its “family” traditions, especially with regards to its employees, who are all studying to use the new lines which will not only increase production, but also facilitate their work.

Traditions meets High-Tech
In 1964, Giancarlo Perego was a small mould manufact-uring workshop, and at that time, the work was carried out using completely different systems and methods. Since then, the company has made giant steps in terms of developments and investments maintaining, however, its professional ethics: the complete respect of clients, suppliers and, of course employees, the primary resource for the quality of its products. A few years ago, according to Mr. Giancarlo Perego and his son Leonardo, the time had come for a big change, even in this time of crisis, which could already be seen in the second part of 2008. With the idea of speeding up production, but with quality remaining as the essential characteristic of its moulds, Perego made an important technical decision: that of automating its entire production line. In fact, 2009 was a year of important decisions - not easy to make (remember, we were, and still are, in the midst of a global economic crisis) - but made to fight back at the difficult situation of the global market. “Yes, it’s true that market demand has decreased but I’m sure that the figures that we have now are the ones that will remain,” said Leonardo Perego, during the recentinterview. “This means that we must work better, in shorter time, and provide more services to our clients: pre-, during- and post-sales, working alongside the same clients for the entire duration of the collaboration. We must also learn to be more specialized and do more than others.” The hollow ...
expand

Article taken from Glass Machinery Plants & Accessories bi-monthly magazine (6 issues per year)
Year: 23 number: 1
Check out Glass Machinery Plants & Accessories magazine

Mould technology
134 Total results
Next »
Page  1 2 3 4 5 6 7 8 9 of 9 
latestOrder by:

GlassOnline Articles by Channel

NOVAMOULESgm215

2015-04-20
Right from the early years of its founding, Novamoules has worked to specialize in the manufacture of moulds and parts....

Busellatogm214

2014-04-20
The story of Busellato Glass Moulds is really no different from many Italian companies, and is based on long-term and...

Merkad

2013-08-20
Merkad, based in Istanbul, Turkey, is a globally known supplier of a wide variety of glassware moulds and machine spare...

Changshujianhua

2012-12-20
Jianhua Mould is located in Shajiabang, the town of Changshu City, close to Shanghai, China’s international m...

Merkad

2012-10-20
Experience, know-how and quality assurance, three very important characteristics that must be guaranteed in mould...

Busellato

2012-04-06
Advantages in distribution, stretching, and workability of the filling material

Fonderievaldelsanefocus

2012-04-06
Innovative materials, now worldwide references in the hollow glass moulds sector

Strada

2012-04-06
Focus, care and attention to clients

Immagine

2011-05-01
From a workshop for repairs and maintenance of glass moulds to the creation of par excellence moulds for the most...

Immagine

2010-09-01
The fast developing world requires and needs new technologies and machinery and this is especially so in the...

Immagine

2010-03-01
Know-How, experience and continuous investments in the latest glassware mould manufacturing technologies for over 25...

Immagine

2010-01-01
When we think about container glass, we often do not consider a very important part of the process – the moulds. Moulds ...

Immagine

2010-01-01
Giancarlo Perego, present on the market for 47 years, has continued to grow and develop it products – high quality m...

134 Total results
Next »
Page  1 2 3 4 5 6 7 8 9 of 9 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962