Channel: Laminating
Hornos Industriales Pujol: Evalam for each and every application

2013-06-06 | Laminating

Founded in 1911, Hornos Industriales Pujol is a specialist in the construction of industrial furnaces, but also in the manufacture of specific products for glass laminating. In this article, the company presents its most recent product Evalam T-B (Evalam Temper-Bend), as well as Evalam 80-120, Evalam Massive and Evalam Color, with test results proving the improved features of these products.

Infinity building at Beograd, by Miodrag Mirkovic
New Evalam Temper-Bend
Evalam T-B (Evalam Temper-Bend) is a product with excellent optical properties, recommended for extreme environments or curved façades and tempered with fastening systems, where the importance of flexion is critical to avoid potential delamination due to stress, as well as where glass flexion will suffer during its life cycle caused by atmospheric agents such as wind or snow.

Improved optical features
Improved optical features on EVA are determined by what we call Haze. Although the transparency parameter is important, almost all the EVA films have obtained acceptable parameters for the human eye. But when we talk about Haze, there is also an overwhelming difference. It is undoubtedly the parameter to take into account when assessing good optical properties, which only appears when sunlight influences laminated products.
Evalam Temper-Bend is a product with a Haze currently incomparable to any other in the EVA film market. As well as offering an edge with regards to the tone of the glass being processed, thanks to Evalam Temper-Bend the glass has a transparent tone. In the case of not having a series of Haze and transmittance measurements, Pujol recommends to carry out four tests of 10 x 10 centimetres with four EVA layers using extra clear glass to compare each EVA film. Once rolled (laminated), the four test glasses should be stacked on a white base and the Haze between them and the edge colour that each of the EVA films should be visually examined. ...




expand

Article taken from Glass-Technology International bi-monthly magazine (6 issues per year)
Year: 2012 number: 5
Check out Glass-Technology International magazine

Laminating
21 Total results
Next »
Page  1 2 of 2 
latestOrder by:

GlassOnline Articles by Channel

Pujol

2013-08-09
Glass processors have, for some years now, been looking for a substitute to the autoclave in the production of...

Pujol

2013-06-06
Founded in 1911, Hornos Industriales Pujol is a specialist in the construction of industrial furnaces, but also in the...

Bystronicartxgti612

2012-02-08
At the end of August 2011, Polish Mochnik Company commissioned the first eco’lamiline for the production of all types o...

Immagine

2011-09-01
Innovation, technology, quality and service. These are the main characteristics of the formula of Hornos Industriales...

Immagine

2011-07-01
This article is the presentation of Maroso’s new laminating system, not only facilitating glassmakers’ work at present, ...

Immagine

2011-06-01
Lamination and its diverse needs and demands in the glass sector are the specialization of the company presented in...

Immagine

2011-01-01
The most recent technical development from LiSEC is that of a brand-new laminating tunnel, which was installed at one...

21 Total results
Next »
Page  1 2 of 2 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962