Channel: Inspection
MSC & SGCC: new process control features for the I-CARE hot-end imaging system

2012-08-06 | Inspection

MSC and SGCC are two major players of the hollow glass inspection market with truly similar paths: almost half a century of experience, and both started as part of famous glassmakers. MSC was created as a small department of BSN in 1963, to invent on-line inspection solutions for its hollow glass production; and, in 1973, SGCC started its existence as part of Saint-Gobain to perform multi-inspection on glass containers with the first star-wheel principle machine. After developing their fields of expertise, SGCC and MSC became independent entities providing inspection equipment globally. In 2008, MSC and SGCC joined forces under the umbrella of Tiama Group to offer complete inspection solutions, with the brand MSC & SGCC.

I-CARE operating principle
The hot-end forming process is, by nature, complex and unstable. The large amount of parameters involved leads to a situation where the forming can only be controlled by skilled operators with a very high level of experience. Even for those, the need for measurement and feedback data is becoming critical. Based on more than 40 years of experience in vision and inspection systems, MSC & SGCC is continuously improving its hot end I-CARE system to bring the best possible answers to this challenge.

I-CARE

I-CARE is a hot-end camera based process control tool dedicated to forming machine operators. Based on one or two infrared cameras, it is able to provide very quick feedback on critical parameters and defect detection, without having to wait for this information to come from the cold end part of the plant. Accurate alarms can also be provided as soon as a deviation appears in the IS machine.
I-CARE has been developed in close partnership with some of the most important glassmakers in the world, thus bringing them a tool able to respond to their exact range of needs. Improving process efficiency, it represents precious help during production changes and the launching of new products. Using the I-CARE software, it is possible to test, either on-line or using stored images, new production settings. Thanks to this simulation, glassmakers know immediately the impact of their set-up on on-going production.

Key features

Using state-of-the-art infrared cameras and a brand new optical...






expand

Article taken from Glass Machinery Plants & Accessories bi-monthly magazine (6 issues per year)
Year: 2012 number: 2
Check out Glass Machinery Plants & Accessories magazine

Inspection
93 Total results
Next »
Page  1 2 3 4 5 6 of 6 
latestOrder by:

GlassOnline Articles by Channel

Heyegm215

2015-04-20
Gerd Schütz, Product Manager of Cold End Solutions, discusses continuous improvement of a stable and reliable ...

IsraVisiongti215

2015-04-20
During the 2014 edition of glasstec, Glass-Technology International was among international press at the meeting held...

TIAMAgm414

2014-08-20
In the move towards ‘perfect’ performance, today’s glassmakers need to take into consideration a series of business met...

Isravisiongti114

2014-02-20
Wuhan Yaohua Safety Glass, one of China’s major auto-glass manufacturers, continues in its commitment to become world l...

2013-12-20
These are exciting times at IRIS Inspection Machines. Relocation to new premises should help facilitate the delivery of...

2013-08-20
This article gives us an insight into the company and production of one of Europe’s most established inspection m...

2012-12-20
Heye’s new slogan, synonymous for its mission – We are Glass People – was introduced during the recent edition of glass...

Isravision

2012-12-20
Thanks to close cooperation with its clients and in-depth know-how of processes, the company presented in this article...

Mscsgcc

2012-08-06
MSC and SGCC are two major players of the hollow glass inspection market with truly similar paths: almost half a...

Spami

2012-04-06
High flexibility, easeness of use and inspection capabilities

Immagine

2011-03-01
Alongside many other innovative solutions presented by the Grenzebach group at glasstec 2010, the new float glass...

Immagine

2010-11-01
Float glass requires more and more the highest quality and, therefore, the best - if not even perfect - results from...

93 Total results
Next »
Page  1 2 3 4 5 6 of 6 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962