Channel: Handling
Heye International SpeedLine Ware Handling for Efficient Production

2014-08-20 | Handling

High results in production require good forming techniques as well as a modern ware handling system to meet increasing speed and precision demands. Ware handling itself begins with the pusher system, which transports containers from the dead plate to conveyor belt.

Heye International SpeedLine Ware Handling for Efficient Production
Heye 2158 3-axis servo-pusher as new standard - also for quad applications
The transport of hot containers benefits significantly from an improved motion profile when implementing Heye International’s high speed pusher type 2158. The optimised motion profile results in a pusher movement parallel to the conveyor belt.  The new pusher type, replacing the former version 2155, combines high speed with a long lifetime and fewer parts. Many parts are also used in the two-axis 2157 series for standard applications, especially the servo-direct drives, reducing maintenance efforts. For large plants with many production lines, the modular design allows for a quick conversion from right-hand to left-hand operations.

In short:
• Service reduced operation
• Minimum wear
• Long lifetime
• Quick article change through easy profile-setting
• Quick exchange of pusher fingers

A further advantage of the high speed pusher is easy job change. Mechanical settings are no longer necessary, for example manual adjustments of the cylinder stroke. Thus, a large part of possible disturbances and inaccuracies in the production process are essentially excluded. Conversant and approved parameters can be reproduced when running a job again, which in turn ensures smooth start-up after a job change. 
The geometry of the pusher mechanisms can be considered a ‘constant’.  By setting defined parameters controlling the motion profile, the system set-up almost becomes a constant when running a job again. Thus, ...


Article taken from Glass Machinery Plants & Accessories bi-monthly magazine (6 issues per year)
Year: 2014 number: 4
Check out Glass Machinery Plants & Accessories magazine

9 Total results
Page  1 of 1 
latestOrder by:

GlassOnline Articles by Channel


OCMI-OTG is a well-known supplier of equipment for the manufacture of tubular glass containers for pharmaceutical use....


Zecchetti is a proud-to-be Italian company operating for more than 50 years in the industrial automation sector in an...


High results in production require good forming techniques as well as a modern ware handling system to meet increasing...


Bystronic glass Easy-Lift handling equipment has been ‘assisting’ its users in the transport of heavy and difficult to m...


The products presented in this article by Alwayse Engineering – active in the material handling solutions industry for m...


“Handling equipment is only popular if it is easy to use,” states Stefan Herrmann, Branch Manager at Semcoglas in Nor...

9 Total results
Page  1 of 1 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Art & culture - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
Glass Machinery Plants & Accessories
World Glass Directory
Flat Glass World Directory
Return to top

Powered by GlassOnline Logo

Copyright © A151 S.r.l. 1996-2018 - All rights reserved

A151 S.r.l. - - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2111551 | Share capital: € 10,000 | P.IVA/VAT No.: IT 02769870342