Channel: Furnace technology
Bystronic: vacuum lifters - small devices with important jobs

2006-09-10 | Mould technology

At first glance, handling devices may only seem to be a small part of the glass preparation process. They are, however, located at critical interfaces, and if they do not operate properly, they can have a devastating effect on all stages of production. Gnter Seeberger, Production Manager at Pilkington Austria, is therefore installing handling devices from the Bystronic technology centre Armatec. During a guided tour of the plant, he explained why people at Pilkington are paying particular attention to vacuum lifters.

Article taken from Glass-Technology International bi-monthly magazine (6 issues per year)

Check out Glass-Technology International magazine

Furnace technology
94 Total results
Next »
Page  1 2 3 4 5 6 of 6 
latestOrder by:

GlassOnline Articles by Channel

SchubertSalzergm314

2014-06-20
With over 130 years of history, and ISO 9001 international quality standard, Schubert & Salzer Control Systems can...

Starahydragm314

2014-06-20
When providing the correct and most suitable furnace for each and every customer, all the parameters that affect...

PSRGM116

2014-02-20
Nowadays most of PSR’s Technical Services projects involve the design and supply of complete new distributor and f...

Sigma

2013-08-20
Furnaces are a critical part of glassworks, and each furnace also has its own critical areas. In this article,...

Aigmf

2012-10-20
Glass melt power density has been studied at different arrangements of electrodes in all-electric melting furnaces. The...

Feracitas

2012-10-20
Choosing the right furnace depends on design, location, but also cost of energy, production quantities and glass type....

Stara

2012-08-20
Saving energy, heat recovery, reducing dead times, all expressions in common and everyday use – especially in industry. ...

Vidromecanica

2012-04-06
Based in Marinha Grande, in Portugal, Vidromecanica is dedicated to the production of equipment for the glass industry...

Immagine

2011-09-01
Based on domestic and overseas markets, and the demands of flat and bent safety glass for automotive, architecture and...

Immagine

2011-03-01
The technology used for the heating of glass in furnaces has developed rapidly over the years. The cause for this is...

Immagine

2010-11-01
Glass Service (Italy) presents its experience in the development and construction of electric furnaces for lead crystal...

Immagine

2010-11-01
The choice of material for furnaces is a fundamental aspect of glass melting and must take into consideration a series...

Immagine

2010-09-01
An R&D project started up to develop a viable batch preheating system has provided SORG with a new, three-part concept...

Immagine

2010-07-01
Developed by Landglass in 2004, forced convection furnaces with Jet Heating Technology were immediately accepted. And...

Immagine

2010-05-01
In this article, Glass Service (Italy) presents its most recent development in glass melting furnaces – designed s...

Immagine

2010-01-01
Furnace manufactures must continuously update and improve their furnaces to deal with the ever changing types of glass...

94 Total results
Next »
Page  1 2 3 4 5 6 of 6 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962