Channel: Autoglass
Safety Glass Experts: important principles for large and complex shapes

2012-03-09 | Autoglass

Large windshields for buses and special vehicles are manufactured using the gravity bending method. Producing this large segment of vehicle glazing successfully requires not only suitable equipment, but advanced skills, know-how, knowledge, and quality tooling, to name a few. This article will review the principles of the bending process for large bus or special vehicle windshields.

Bus nose featuring a large complex windshield design
The principles of the bending process for large and demanding, bus or special vehicle windshields are based on the gravity bending method. In this article, we will take a look at this process, divided into five individual stages: Loading, Pre-Heating, Bending, Final Bending and Annealing/Cooling. Although all of these individual bending stages do not physically really exist, dividing the entire bending process into different stages enables easier approach to the subject.

Loading – the important first step
Towards successful results or complete failure
Before heating, the pre-processed glass pair is loaded on to the mould usually with the help of loading equipment. Although this is a cold stage, there are several aspects that can either guarantee successful results or result in a complete failure. Unbalanced loading position will create difficulties that might prove incurable later in the process causing breakages, deformations, and many other defects.
Firstly, the glass should be carefully placed on top of the mould. After the glass is firmly on top the mould, the mould should support the glass pair firmly and uniformly all over. There should be no pinpoints such as stresses/weight peaks in any specific areas. Side supports and glass centre support help to achieve this perfectly balanced state that is required to guarantee the perfect departure point for the bending process.
If the mould is equipped with freely moving counterweight arms, the weights should be adjusted so that t...





expand

Article taken from Glass-Technology International bi-monthly magazine (6 issues per year)
Year: 2012 number: 1
Check out Glass-Technology International magazine

Autoglass
8 Total results
Page  1 of 1 
latestOrder by:

GlassOnline Articles by Channel

Safetyglass

2013-08-09
Industries are developing fast and competitiveness goes hand in hand with this development. Being competitive no longer...

Safetyglass

2013-01-09
Lamination defects typically represent no more than 1-2 per cent waste from the production of laminated windshields....

Safetyglassexperts

2012-03-09
Large windshields for buses and special vehicles are manufactured using the gravity bending method. Producing this...

Safetyglassexperts

2012-02-15
The second part of this two-part article “Bending perfect shapes” will review the challenge of bending smooth and pro...

Immagine

2011-09-01
Modern vehicle windshield design is introducing many challenges to the manufacturers. In this two-part article, I will...

8 Total results
Page  1 of 1 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962