Channel: Anniversary
Fonderie Valdesane: 50 years of specialization in made to measure products

2011-09-01 | Anniversary

Fifty years of history. This is the first thing that springs to mind when speaking about Fonderie Valdelsane. And speaking to Roberto Gerbi, President of the Board of Directors and second generation of the founders of Fonderie Valdelsane, it is clear that the traditions of investments and developments are strong. Founded in 1961 by three partners: Gerbi, Cioni and Fusi, the company started its activities in the sector dedicated to special metals and has, since then, continued to develop and expand to become the foundry that it now is. With the second and third generations of two of the original families of the founders now in the company – Gerbi and Cioni – Fonderie Valdelsane is continuing to invest, expand and develop in its speciality – foundry materials in cast iron and bronze for glassmaking moulds.

Fonderie Valdesane: 50 years of specialization in made to measure products
THE COMPANY - THEN AND NOW
With its 50 years of history, Fonderie Valdelsane, based in the traditional glassmaking area of Italy – Tuscany – is proud of its origins. Founded as a family-run company with three partners: Gerbi, Cioni and Fasi, the company still remains so with with second and third generations of two of the three founding families – Gerbi and Cioni – still running the company now. Development and investments were and are a strong commitment of the company and its owners, which has, over the years, moved more and more on to automation and technology to improve its production, of course, but also to make the workplace a better environment for its workers. This is clear to see if we consider that many of the personnel at the company remain there for most of their working life.
Company production is based on the two metals used in glassmaking moulds. The diverse types of metals are chosen depending, not only on the end product with respect to quality and working life of the moulds, but also on the process that the same materials and moulds must undergo. Of course, the choice also depends greatly on the quality, quantity and speed of bottles to be manufactured since cast iron does not enable to reach the extreme seeds that can be reached with bronze, since the heat conduction of the latter is certainly higher than the former. And this is why cast iron makesup for 90 per cent of Fonderie Valdelsane’s present production, but future ideas are to concentrate more ...

expand

Article taken from Glass Machinery Plants & Accessories bi-monthly magazine (6 issues per year)
Year: 2011 number: 5
Check out Glass Machinery Plants & Accessories magazine

Anniversary
38 Total results
Next »
Page  1 2 3 of 3 
latestOrder by:

GlassOnline Articles by Channel

Edgetechgti115

2015-02-20
At glasstec, many companies held celebrations for important anniversaries. One of these – Edgetech, a Quanex Building P...

BystronicGTI514

2014-10-20
This year, Bystronic Maschinen AG can look back upon a successful 50-year company history. This was reason enough for...

PocoGraphitegm414

2014-08-20
POCO plans to celebrate a milestone of 50 years in the graphite business with an open house in the fall.

Peregogm214

2014-04-20
During a recent visit to Perego, one of Italy’s ‘Master’ mould manufacturers, we had the chance to speak to Giancarlo an...

2013-04-20
When we consider the machines to process the edges of glass sheets, we often do not consider the actual wheels that...

Emhart

2012-10-20
We visited Emhart Glass, one of the hollow glass market’s most enduring companies, to learn how it has grown and e...

Futronic

2012-10-20
Today, futronic is one of the world’s top suppliers in the field of complex automation and drive solutions for the g...

Bavidro

2012-08-20
This year, Ba Vidro is celebrating 100 years of activity. Starting from a Portughese company, it then went on to...

Emhart

2012-08-20
A centenary is a very long time to be working in any sector and industry. And to be not only working in the industry,...

Immagine

2011-09-01
Fifty years of history. This is the first thing that springs to mind when speaking about Fonderie Valdelsane. And...

Immagine

2011-03-01
It is not often that we celebrate the anniversary of a product, but being the 25th it is well worth it! In this...

Immagine

2010-11-01
Experience is always a principal request of any firm, and more so when we are speaking about a company of the glass...

Immagine

2010-09-01
Experience, dedication and specialization. These are the main characteristics of the company presented in this article....

Immagine

2010-07-01
Twenty-five years of experience, all machinery manufactured inhouse, worldwide partnerships. This all amounts to...

Immagine

2010-05-01
With more than 350 lines equipped worldwide, Vertech’ collaborates with major international glassmakers, supplying them ...

Immagine

2010-01-01
“Synchronized solutions - exceeding customer expectations today while exploring new trends in the constantly evolving, c...

38 Total results
Next »
Page  1 2 3 of 3 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © Smartenergy S.r.l. 1996-2016 - All rights reserved

Smartenergy S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962