Channel: Adhesives and sealants
Graco: continuous improvements in adhesive quality and efficiency

2015-12-20 | Adhesives and sealants

Producing both insulating glass and curtain wall incorporates bonding and sealing steps using adhesives with multiple components. The success of these steps depends on proper mixing and accurate, on-ratio dispensing of the adhesive components. While there are a variety of technologies available to the industry, many of these widespread mixing and dispensing methods have serious drawbacks that can impact final product quality, material costs, and production time. However, recent additions to the proportioner market incorporate new technology that addresses many of these drawbacks. This new technology offers improved real-time ratio assurance, reduced material usage and enhanced tracking of key information. The quality of the final product is improved, and both material cost and production time are decreased.

Graco: continuous improvements in adhesive quality and efficiency
The glass industry faces unique adhesive challenges
A proportioner is commonly used to mix and dispense multiple component adhesives in insulating glass and curtain wall applications.
Adhesive and sealing proportioners, whether hydraulic or pneumatic, use mechanically linked pumps, rocker arms and gear pumps. These existing proportioner systems have many drawbacks, the main issues being adhesive dispense accuracy, operational difficulty, material waste, frequent repair and maintenance, high capital costs, and lengthy equipment lead times.
Adhesive and sealant manufacturers formulate their materials to be mixed at specific ratios for maximum performance. Current proportioner technologies that rely on mechanically linked pumps offer no real-time ratio control. This is a problem when mechanical malfunctions occur, because it is impossible to tell that dispensing ratios are wrong until after the adhesive has been placed on the glass. Deviations from manufacturer-recommended mixing ratios can result in products that do not adhere or fail to cure, creating material waste and product rework and of course losing time.
These existing proportioner technologies also create many challenges to operators, especially as far as ratio settings are concerned. Operators must manually adjust ratio settings, with the smallest error leading to inaccurately mixed materials and the issues previously described. Complex cleaning processes including base purges, sensitive dispensing adjustments, and...



expand

Article taken from Glass-Technology International bi-monthly magazine (6 issues per year)
Year: 2015 number: 6
Check out Glass-Technology International magazine

Adhesives and...
3 Total results
Page  1 of 1 
latestOrder by:

GlassOnline Articles by Channel

Gracogti615

2015-12-20
Producing both insulating glass and curtain wall incorporates bonding and sealing steps using adhesives with multiple...

3 Total results
Page  1 of 1 
Other channels: A.T.I.V. Articles - Adhesives and sealants - Advanced electronics - Annealing - Annealing & decorating - Annealing & tempering - Anniversary - Art & culture - Autoglass - Automation and it - Automotive glass - Ball Gathering - Batch plants - Building applications - Case history - Coatings - Cold-end - Company financial news - Company news - Conditioning - Containers - Conveyors - Cooperation - Country outlook - Crystal - Cullet treatment - Cutting technology - Decoration - Design - Detection systems - Diamond Tools - Directives - Double glazing - Drilling - Drying - Ecology - Edging - Energy saving - Events - Fibre treatment - Finishing lines - Forming - Furnace technology - Fusing - Glazing / Insulating Glass - Grinding and bevelling - Handling - Hot-end equipment - Ig equipment - Industry update - Innovation - Inspection - Institutes - Laminating - Lehrs - Load moving - Lubrication systems - Machinery developments - Manufacturing technology - Markets & trends - Mathematical recreations - Mergers, acquisitions & disposals - Mirror technology - Mould technology - Neutralisation plants - Numerical control - Old issues - Optoelectronics - Other news - Palletising/depalletising - Personnel & industrial relations - Photovoltaic glass - Plant technology - Pressing - Printing and tempering - Processing - Product news - Production costs - Purification plants - Refractories - Representative organizations - Research and development - Resin technology - Safety glass - Science & technology - Screen printing equipment - Sealants - Sector trends - Shaping - Sheet processing - Software - Specialist applications - Statistics - Storage and handling - Surface treatment - Surveys - Tableware - Tempering technology - Testing - Thermal imaging - Thermal insulation - Transitions - Treatment plants - Tube production - Turnkey plants - Viewpoint - Worker safety -

Our Glass Magazines & Annual Guides Read online free of charge

Glass-Technology International
 
Glass Machinery Plants & Accessories
 
World Glass Directory
 
Flat Glass World Directory
 
Return to top

Powered by GlassOnline Logo

Copyright © A151 S.r.l. 1996-2017 - All rights reserved

A151 S.r.l. - publications@glassonline.com - Cookie policy
Registered office: Via Antonio Gramsci, 57 - 20032 Cormano (MI), Italy
Company registry - Milan, REA No.: MI-2022277 | Share capital: € 10,000 | P.IVA/VAT No.: IT 08386450962