2005 Employment Wanted
| 2005 Employment Wanted |
28 December 2005
Lucky Edeki
Aluminum Fabricator
Edeki Aluminum Product
8 Ibaa Street D/line
Portharcourt
Rivers State
234
Nigeria
Tel: +2348024350075
E-mail: luckyede@yahoo.com
am seeking application for the post of aluminum fabricating glass windows etc. i have a certified certificate of aluminum certificat and trade test. sincerely hope to do well when employed with 9-10 years experience
28 December 2005
Vijaya Bhaskar Tallapragada
Manager- Production Maintenance
E-mail: vbtallapragada@yahoo.com
I am looking for a suitable post of Manager- Production (Maintenance), in a reputed glass container plant in India or abroad. Age: 41 Sex: Male; Qualification: Degree in Mechanical Engineering. Experience: Maintenance of IS Machines 10 section DG Press and Blow & Blow and Blow. Total experience: 13 years in glass container plants located in India, Lebanon and Tanzania including ‘job change execution’,’ shutdown’ and installations. Interested employers may contact me at my email
28 December 2005
V. K. Kannan
E-mail: kannanglass@rediffmail.com
I am M.Tech (Ceramic) Engineer from India, with 10 years of experience in the Glass Industry. Can Handle Batch House, Furnace and Lab independently. Have good knowledge of trouble shooting of glass defects, furnace maintenance, operation and hot repairs. Worked with Soda-lime Container Glass, Soda-lime Flat Glass, Borosilicate Glass, Soda-lime tubing, and Lead Glass Tubing. 1.Reduced Iron content in Glass to 0.02 % 2.Established New parameters to forecast life of Furnace 3.Drilled and installed two Horizontal Electrodes “ on the run”. 4.Solved various glass quality problems 5.Good trouble shooting skills in glass defects and furnace. 6.Good knowledge of Batch Calculations, and batch adjustments to get good glass quality 7.Worked with 170 TPD End fired GTF 8.Worked with 230 TPD Cross fired GTF.
28 December 2005
Sunilkumargopi
Electrical Machine Operator
Duabi Aluminium
Jabelali
Dubai
3627
Uae
Tel: 00971508862691
E-mail: sur_00147@rediffmail.com
i have compteated my diploma in electrical and electronics engg with five years of experience in plant maintenance and plc machines, in that one year i worked in one of the glass factory in bangalore "atul temp safety glass works pvt ltd. i had undergone three months training for tamglass machine installation and trouble shooting from tamglass technicians.tamglass is one of the leading machine supplier for our company and specially i have hand's on experience in plc controlled bending machine(bigger and smaller automotive glass), laminating, machine, autoclave, toughning plant, washing macine,and bavelloni cutting machine. i was working in the company as asst. maintenace engineer got lot of knowledge about glass, template, mould making, different types of glass, printing, dehumidifier system, glass laboratory for checking the glass and more electrical operation and maintenance also etc
28 December 2005
Shibu Varghese Mootheril
E-mail: mshibu_varghese@hotmail.com
i am shibu Varghese M. Now in IL USA. I got 7 years of experiance in glass industries. four years in gulf guard (SaudiArabia) the 19th plant of guardian Industries Corp. Two years in UAE. Emarites glass the coating plant. any firm interested in me may please contact in my mail.
23 December 2005
M.a.imran
Production Cum Maintenance Engineer
Regma Tiles Manufacturing Company
Karaikal
Pondychery
India
Tel: 09986340432
E-mail: imran_gdv@yahoo.com
My name is M.A. IMRAN TECH mechanical engineer in 2004 had 1 year exp in regency ceramic tiles as a production cum maintenance engineer (trainee). Now i am searching for a suitable job to build up my career i have already apply to jindal company.
23 December 2005
Joseph Lewis
E-mail: tracey.lewis57@ntlworld.com
mold shop fitter charge hand.fully experienced fitter, cnc programming,milling,and all aspects of mold fitting.am currently one of three charge hands in our mold shop.
23 December 2005
Richard Adjei
Detroit
Mi
Tel: 3137241138
E-mail: kwakura56@yahoo.com
My name Richard Adjei ,I have worked in the glass industry for over 13 years as furnace operator, i am seeking full time employment in detroit.
19 December 2005
Saidu D.gyams
Sceintific Glass Blower
Ahmadu Bello University
Hanwa Gra
Zaria
Kaduna
234
Nigeria
Tel: 2340835886637
E-mail: mendus2005@yahoo.com
e-mail;mendus2005@yahoo.com im a graduate of glass technolgy andsceintific glass blower for 12yrs. im presently the head of glass blowing workshop in ahmadu bello university, zaria- nigeria
19 December 2005
Mikee
Production Superivisor
E-mail: mike_guardian@hotmail.com
10yrs exp in float process dept furnace and tin bath can do all types of hot jobs any one intrested in me mail me
19 December 2005
Virgil Jennings
Journeyman Machine Upkeep
Tel: 1-573-756-4676
E-mail: vickysuejennings@yahoo.com
looking to better mt family,s furure in the glass industry journeyman operater and upkeep with many years of experience i started operating the old drum style machines back in 1978 currently upkeeping two ten section machines making bottles for ab would be interested in a corperate job or something in the field related to production would be willing to travel
19 December 2005
Edgardo V. Morales
E-mail: edgard_moralles@yahoo.com
I would like to apply for a position of Glass Etching Designer or Stained Glass Maker. My 18 years of experience in this field honed my skills as an Artist. This helps me to work easily even without supervision from my superiors/employer. I also have knowledge in signages and billboard making, styro cutting, oil, water color and charcoal painting, t-shirt and other fabric printing. I am currently in Abu Dhabi, U.A.E. working as Glass Ething and Stained Glass Designer. I had been in other parts of Middle East, such as Al-Khobar, and Jeddah in Saudi Arabia. My computer knowledge in Corel Draw helps me in making state-of-the-art designs.
19 December 2005
Michael Valenzuela
Modeller/blocker Caser
898pooc Sta Rosa City Laguna
E-mail: mikel_valenzuela@yahoo.com
dec,19 2005 email ;mikel_valenzuela@yahoo.com im mikel valenzuela 11 years experience in sanitary wares. my position is mold shop trainer and my last is modeller/blocker caser
15 December 2005
Elena E. Iligan
Purok 5,caramcam District, Mangagoy
Bilsig City
Surigao Del Sur
8311
Philippines
Tel: +639194492667
E-mail: elensweet32@yahoo.com
I'm elena iligan 32 years old from bislig city, philippines. if you need the services of an efficient ,assiduous, trustworthy individual to take part of your agency me as an applicant for any vacant position. i woul like to describe myself as one who adopt well with new challenges. i am hardworking individual requires less supervision. i have an experience working about glass and aluminum in the different companies here in the philippines such as asia glass palace inc., spectrum trading and contruction with glass and aluminum and n.g.e glass.
15 December 2005
Ellen Cubitt
Flat Glass Sales
Glass Company
Tenth Avenue
Durban
Natal
4001
South Africa
Tel: 031-3129655
Fax: 031-329655
E-mail: scotbok@mweb.co.za
I am looking for employment in Bahrain in flat glass sales.
12 December 2005
Noel L Canono
E-mail: cwell777@yahoo.com
I'm a masterglass blower and supervisor at the same time. i have 10 years in experienced in glass factory i am also a glass designer, i design trophies, balls, paper weight..
12 December 2005
Sudhindra Joshi
Production /cnc Engineer In Glass Industry
Koperkhirane
Navimumbai
Maharastra
400179
India
Tel: 09821624053
E-mail: ssjoshij@yahoo.co.in
I am having 4.5+yrs of exp in Glass Industry Toughning Plant & I am looking for similer job any where in the world.
12 December 2005
Amad Uddin
Quality Foreman
Arc International Middle East L.L.C.
Ras Al Khaimah
3248
U. A. E.
Tel: 00971507401964
E-mail: amad_uddin123@yahoo.com
myself amaad uddin graduate in arts faculty having 6 years experiance as a quality foreman in arc international middle east l. l. c. (u. a. e.) work profile : 1. allocation of man power. 2. taking decision of quality on cold line. 3. giving feedback to hot end. 4. arrenging packing material. 5. give training to all followers about critical & minor quality parameters.
12 December 2005
Vinay Srivastava
Project Manager / Engineer
Sankalp Engineers
54-a-5, nnp Malad (e)
Mumbai
Maharashtra
400097
India
Tel: +91-9324742530
E-mail: vinay_srivastava72@rediffmail.com
Dear Sir/Madam I have wide experience in construction activities / Hotel/Resorts/Interior/Structural Glazing/Curtain wall/ACP Cladding & other for the same Looking for the oportunity to work as Project Manager / Engineer in Dubai
12 December 2005
Carlos Quintero Morales
Plant Manager
Vical Group
12 Avenida 14-18 Zona 2
Guatemala
01002
Guatemala
Tel: 502 53175387
Fax: 502 22887236
E-mail: cquint1408@yahoo.com
Objective Work in Glass Industry, like plant, Technical or Production Manager. Summary Mechanical Engineer with over 24 years of working experience in different fields of the Glass Industry. Committed to the highest levels of professional and personal excellence.
Work experience
Plant Manager Costa Rican Glass Factory Direction of the Production Management, Raw materials and Glass condition management and the Plant Engineering Management.
Technical Corporate Manager Guatemalan Glass Factory- Vical Group Responsible of the technological standardization, operation processes and maintenance of the two glass production factories of the group. Responsible of proyects fornew production processes for containers.
Production Manager Guatemalan Glass Factory Administration of the production area that includes the molds workshop, forming machines workshop, production department and the containers technical design. High experience in I.S. Machines
12 December 2005
Kartik Sable
Tempering Incharge
Fg Glass.com
Taloja
Panvel
Maharashtra
India
Tel: 9224273350
E-mail: mind1@rediffmail.com
I am having total 8 years experience in glass industry. seven years as a shift incharge in a glass manufacturing and one year as a tempering incharge. i am b.e(mech)candidate with good managing skill and knowledge of all processes like cutting, grinding, washing,and insulated glass.also i have sponteneous skill of understanding any type of machine.therfore i am seeking a job in a glass process (tempering plant) industry only as a production officer.
6 December 2005
Saber Boukal
Engineer of Electronique
Vsi Algerie
Cite Kessar El Kellal N 109
Constantine
Enginner
25210
Algerie
Tel: 0021376302484
E-mail: boukal.saber.1@caramail.com
I made my studies in university of menterie to Constantine, of formation practicum on machines of glass; I am bachelor of electric. I have been used during the 16/05/2002 until this day, in a glassware to VSI Constantine, as engineer of state in electronics, I made the electric installation of several machines of glass " bottle production + glass of oven table ", arks of recuisson, of feeders, of compositions, the starting up, maintain him, the maintenance of these machines.
6 December 2005
A Shesh Raj
Container Glass Marketing Professional
Agi Glaspac
Moti Nagar
Hyderabad India
Andhra Pradesh
500018
India
Tel: 040-55919404
Fax: 040-55919404
E-mail: agi_glaspac@sify.com
sr marketing manager in container glassware industry in India looking for an opurtunity abroad. Experience in Production Planning & Marketing.
6 December 2005
Reynaldo B. Barba Jr.
Trainor/instrumentation Technician (scientific Glassblower)
E-mail: gbote143@yahoo.com
I'm interested to apply for a position as a Scientific Glassblower, 25 yrs experienced in research and development in the field of sciences, involved in goverment research work in Saudi Arabia,at King Saud University, Faculty of Science, now I'm connected in University of Khartoum, Sudan, Africa as trainor in Scientific Glassblowing Technology & instrumentation technician, in charge in maintaning the need of student & researchers, involved in project in Agriculture, Engineering, Physics, & other research project in the field of science.
1 December 2005
Sudhindra Joshi
Production , Project Incharge / Cnc Programmer
Glass Industry
Plot No-274 , Sec-19 ,koper Khirane, Navimumbai
Navi Mumbai
Maharastra
022-400701
India
Tel: 9821624053
E-mail: sudhindra_j@rediffmail.com
Iam Sudhindra joshi , I had completed my Diploma in mechanical engg , & pursuing my Btech in Mechanical engg , Iam having 4.5+yrs of exp in Glass Industry (ie Toughning Plant) I worked as Marketing engg , Production engg , CNC programmer & presently working in Tuff Glaze (I) Pvt ltd as a Process Incharge for last 1.5yrs , before that I worked in GSC Toughned Glass Pvt ltd for 3yrs in which I worked in Marketing , Production , CNC programming ,& I also copleted a Project work thats of Installation of Toughned glass for 5 star Hotel (Grand Hyatt , Vokola Mumbai) so Iam confident to take any kind of responsibilities in Glass Industry, I Can achive any kind of Target set by the company.
1 December 2005
Sudhindra
E-mail: ssjoshij@yahoo.co.in
Sir , >Iam having 4.5+yrs of exp in glass Industries , so Iam sending my Resume for any openings that suits with my exp .
28 November 2005
Pradip Nukte
Production Engineer
Arc International Middle East Llc
Ras-al-khaimah
3248
U.A.E.
Tel: 00971503735079
Fax: Pradip Nukte
E-mail: pradipnukte@yahoo.com
myself pradip nukte graduated in mechanical engineering with 5 years experience in container glass (india) & 1 year in tableware glass (u.a.e.)
28 November 2005
Mussie Wolday Woldeyohannes
Dubai
P.o.box64875
Uae
Tel: 00971-50-8515127
Fax: 00971-4-2215759
E-mail: mxwolday@yahoo.com
I am a Mechanical Engineer (BSc) and Glass technologiest (MSc) from Sheffield University, UK, with 23 years of experience in various eng. fields & 7 years experience in a glass factory in particular as technical & production manager. Looking for similar position in UAE. My mobile phone is: 00971-50-8515127.
28 November 2005
Dev Kumar Tripathi
Benichak
Deoria
Uttarpradesh
274704
India
Tel: +9657946546
E-mail: devkumartripathy@yahoo.co.in
respected sir, here i am sending my sort resume for the post of I.S.OPERATOR.and i have an experience of 12 years in glass factories. so i am looking for the best job oportunity from your side please provide me proper guideline.
28 November 2005
Babar Qayyum
Supervisor Of Glass Machinary Maintenance
Pakistan
Tel: +92537544267
E-mail: babar_qayyum16@yahoo.com
I am a Machinist and Skilled Technicion of Glass Machinary. I have passed diplomas in commerce and shorts courses of Computer.
21 November 2005
Sundereswaran N.K.
E-mail: sundar@mgw.in
I am a qualified Engg. and graduate having incredible qualities and working as a G.M. Marketing in a glass factory in India.Looking for similar position in Gulf especially in Dubai.
21 November 2005
Victor Meteke
E-mail: benny4greatness@yahoo.co.uk
I am meteks victor working as a mechanical engineer (in contracts department) in famous firm at Lagos-Nigeria which is engaged in all glass, aluminium and steel works. Specialist in curtain wall works. Largest firm in Lagos. I am looking for an opportunity abroad in the same field or related field. Total Three year experience in all types of glass. (Glaverbel, Guardian, Pilkington etc..) Am also in interested in Driving if the opportunity is open.I bag a diploma in computer Engeneering,website management.
21 November 2005
Satish Kumar Chanda
Batch House And Furnace Manager
E-mail: satishkchanda@yahoo.co.in
having 28 yrs experience in industry in managing batch-house and furnace, furnace construction and repairs
21 November 2005
Deb Vanskyock
Journeyman Operator
Saint Gobain Containers
Center St.
Dunkirk
Indiana
47336
USA
Tel: 765-789-4886
E-mail: d.vanskyock@insightbb.com
I have been employed as a machine operator for a world class leader in the manufacturing of glass bottles and containers, for 5 years. I am looking to relocate in the southern states.
18 November 2005
Avinash Indulkar
Continous Carburising Furnace Erection And Commissioning Engineer
E-mail: avinashindulkar@yahoo.com
Dear sir/madam, I have 9 years experience in installation errection and commissioning of continous carburing furnace(Holcroft Design) as well as batch type furnace. I want a job in the same field in any forigen country except India. If yes then Please contact me on my email id.
18 November 2005
Nemade Ulhasrao Ramesh
Operator
Larsen & Toubro Ltd
Sinner
E-mail: ulhas_raonemade@rediffmial.com
I am working in mould shop From 1996 as operator in Larsen &toubro ltd at sinner. I have completed DME in2005 .pl if u want any req pl contact me .
18 November 2005
Sunil Balkrishna Prabhune
E-mail: sunilbprabhune@yahoo.com
PERSONAL QUALIFICATION B.Sc (Chemistry)
PROFESSIONAL QUALIFICATION
a) DBM, ISO 9001, Total Work Experience(23 yrs) A) M/s. Gulf Glass Manufacturing Co KUWAIT (October2002 -April 2005) Worked as an In- charge for Batch & Furnace and member of project team for Rebuild of Furnace I & Complete set up of Plant for Furnace II. Job Profile:
cost effective composition of Flint Glass.
Continuous monitoring of Glass Quality.
Produced Emerald Green Glass.
Successfully completed Furnace
I rebuild within stipulated time period. Special Awards: Received special award for outstanding performance for the year 2003 and 2004. Received an appreciation for the efforts in completing the Project I in June 2004.
B)M/s Owens Brockway (I) Ltd. Pune. 18 yrs experience in Glass line with many projects handled like reducing cooling time,crystal clear glass manufacturing.etc
15 November 2005
Mohy Elsadany
Manager Director
Cairo
Egypt
Tel: +20121022275
Fax: +02025611391
E-mail: mohy_tech@yahoo.com
I am professional in all kind of glass(oil -gas -electric cold top - lehr) furnaces. the position required is manager director for glass company
15 November 2005
Joel S. Paule
Designer
Philippines
E-mail: mypersonal_add@yahoo.co.uk
Good Day! I am Joel S. Paule, Filipino citizen and B.S. Architecture Diploma Holder.I would like to find a better opportunity outside the Philippines. I am previously and currently working in the Glass and Aluminum industry as a Designer.I have 7-years of extensive experience for the said field of work locally and abroad (UAE).I am familiar with Unitized curtain walling,Stick & toggle system curtain wall, cladding & doors/windows works. I am flexible, hardworking and can able to work with minimum supervision. Interested parties, please contact me through my email add. Thank You.
11 November 2005
Meindhikaar Venkat Ramana
Qse Supervisor
M/s. Arc International Middle East Llc
3248
Ras-al-Khaimah
3248
United Arab Emirates
Tel: +97150-3732556
E-mail: mvr1975@rediffmail.com
CURRICULUM VITAE M.V.RAMANA
OBJECTIVE: Obtain a scalable position in a professionally managed industry for the purpose of sharing years of diverse experience that rewards all from continuing growth shared by others experience.
STRENGTH: Competent in analyzing operational deficiencies researching causative factors and implementing effective plans to improve the performance.
QUALIFICATION: Technical : Passed A.I.I. Ceram (Equivalent to Bachelor Degree in Ceramics) Specialization in Glass Technology, with 'First Class' from Indian Institute of Ceramics, G.C.R.I, Kolkatta. Received "AMIC AWARD" from Indian Institute of Ceramics, Kolkatta. For AIICeram examination 2004
8 November 2005
Ayman
Engineer
Arapco
5294
UAE
Tel: 0503059350
E-mail: ayman_elkholy_1800@yahoo.com
Ayman Ibrahim Ramadan Ali El-kholy Objective Seeking for a job as Production Engineer. Education Graduation grade Main courses B.SC. of Mechanical Engineering, Production Engineering Department, Alexandria University, Egypt. GOOD
Engineering Materials, Production Operation (Casting, Forming, Machining, Welding) Metrology and Quality Control - Industrial Engineering.
Languages
Arabic (mother tongue) English ( reading ,writing, speaking)
Work experience
Aluminium and Glass CO. Working as Production Engineer on Horizontal Tempering Furnace (TAM GLASS), UAE.
Training at West Delta for Electricity Production CO.EGYPT. Training at EL Atal for Ion and Steel Factory, EGYPT. Computer skills General Word Excel Power Point AutoCAD-solid Edge Active, motive, ambitious, co-operative, work with the team spirit.
8 November 2005
K.abdul Hameed.m.a, M.phil. Ph.d
Economic Analyst
Jeddah, Kingdom Of Saudia Arabia
Jeddah
KSA
Tel: 0483-2771974
Fax: 0483-2771974
E-mail: hamidkodi50@hotmail.com
I can conduct research studies on glass industries by using modern statistical methods and can predict its demand, profit, company's income etc. I am Ph.D holder in economics and who conducted studies about the industries.
Research Experience:10 years Experience in the present Job; 23 years
8 November 2005
Loreto C. Reloza Jr.
Glass Forming Staff
San Miguel Manila Glass Plant
Binondo
Manila
1100
Philippines
Tel: 09183700841
E-mail: jessreloza@yahoo.com.ph
As of now i'm working at manila glass plant in the philippine for 18 years as glass forming staff, with the knowledge of machine job change, bottle defect correction, mold repair & maintenance, foreheart and feeder control.
8 November 2005
Chintan Patel
Service Engineer
Videocon Narmada Glass, Bharch
At & Po. Nani Devsar
Bilimora
Gujarat
396380
India
Tel: 91-2634-284932
E-mail: chintan_er@yahoo.com
I'm chintan patel completed my B.E.Electronics & com. and i am very much interested in glass industry and also i visited the videoconglass company in bharuch. i have very much skills in electronics field basically in power electronics. also i m interested in all other related to electronics. i assure you that i am hardworking and sincere.and if you given a chance I'll prove my capabilities.
3 November 2005
Mohan Menon
Technical
Verretech Asia
Kuala Lumpur
Selangor
68000
Malaysia
Tel: +60123668596
Fax: +60342805260
E-mail: seglass@myjaring.net
I am a 46 year old Malaysian with experience of 26 years of the glass industry. The experience and knowledge I have gained over the years has given me much achievement with glass companies within Malaysia, Singapore, Japan, China, Australia and Austria. During the last 5 years while attached with Siglam Handelges, I have had the opportunity to service clients in India, Pakistan, Middle-East, Thailand, Indonesia and Philippines. Also gained experience as exhibitor for Siglam products exhibitions mainly Glasstec in Dusseldorf Germany, Big5 in Dubai, Glasstech Singapore and Glass Exhibitions in Thailand and Malbex Exhibitions in Malaysia. The experience in the technical aspect and also my knowledge of the glass industry, as a whole, has helped me in successfully commissioning, manufacturing, technical servicing and technology/manufacture know-how. Yours sincerely Mohan K.P.B. Menon
3 November 2005
Sundarewari. B
E-mail: sundari_chem@yahoo.com
iam b sundareswari completed my m tech degree in energy engg now iam working as energy auditor is there is any oppurtunity for me if so i am gtatefull to you thanking you sundareswari b
31 October 2005
Tonya Dustine Duran
Padprinter
13190 N. River Rd.
Constantine
MI
49042
United States
Tel: 269-435-8706
E-mail: durantonya@yahoo.com
i am an expierenced pad printer, have only worked with plastic's but would be wiiling to learn how to pad print glass
31 October 2005
Sayuti Samuri
Malaysia
Tel: +6012 3500743
Fax: Sayuti Samuri
E-mail: hide_xpert@yahoo.com.sg
I have 4 years experience as Production Engineer (Forming Department) and 4 years experience as Shift Superintendent at Kuala Lumpur Glass Mfrs Co. Sdn Bhd, Malaysia which produces glass container.Forming machine using Emhart AIS double/triple gob and Bottero double gob. As Shift Superintendent, I managed about 40 employees from various department (Batch and Furnace, Forming, Cold End and Quality, Packaging and Machine Maintenance).Education background in Mechanical Engineering, Diploma in Business Management and Diploma in Human Resource Management
31 October 2005
Ernesto B. Atienza
Aluminum Installer And Glass Fabricator
Self-employed
#4 M.l. Quezon St., City Subd.,
San Pablo City
Laguna
4000
Philippines
Tel: (+63) (049) 560-4821
E-mail: chrisdhanielle_mcea@yahoo.com
I am Mr. Ernesto B. Atienza. I worked as Aluminum Installer and Glass Fabricator for more than 44 years now, and I can say that I already mastered my skills as Aluminum Installer and Glass Fabricator. At present I am looking for the work which is similar with my working experience.
28 October 2005
Sayuti Samuri
Malaysia
Tel: +6012 - 3500743
E-mail: hide_xpert@yahoo.com
I have 4 years experience as Production Engineer (Forming Department) and 4 years experience as Shift Superintendent at Kuala Lumpur Glass Mfrs Co. Sdn Bhd, Malaysia which produces glass container.Forming machine using Emhart IS double/triple gob and Bottero double gob. As Shift Superintendent, I managed about 40 employees from various department (Batch and Furnace, Forming, Cold End and Quality, Packaging and Machine Maintenance).Education background in Mechanical Engineering, Diploma in Business Management and Diploma in Human Resource Management
28 October 2005
Richard Julian M. Lumabao
Senior Estimator
Aluminium & Light Industries. Co. Ltd.
Greenbelt Road, Industrial Area 2
Sharjah
United Arab Emirates
Tel: +971-50-5868798
E-mail: rj91397@yahoo.com.ph
Offering an 12 years' of extensive training and experience in the aluminium & glass industry with involvement from staff supervisory to mid-level management ranging from frameless glass shopfronts, unitised "bespoke" curtain walling, sticked-type curtain walling, point fix glazing, skylights, glass balustrades, aluminium railings, solid and composite walling claddings, insulated & honeycore cladding, insulated roofing. Proud to be one of the pioneers in introducing unitised curtain walling in the Phillipines and help my current employer to pioneer the same in the UAE in 1999. Working with ALICO with its wide range of manufacturing division that includes for processing glass from reputable manufacturers such as Glaverbel, Ford Glass, St. Gobain, etc. Successfully tendered over $200M worth of prestigious projects in the UAE & Kuwait for the last 6 years of my stay with ALICO. Looking for job opportunity in Canada, UK and the USA.
28 October 2005
Tapaskumardutta
I.s.(maint.orprod.engr)
273/c, Bangurpark, 11thlane
Rishra (howrah)
Westbengal
712248
India
Tel: 91229830718610
E-mail: akash_dutta31@rediffmail.com
I wish to apply for the recruitment and offer myself with hope that you would consider my application favourably. I am a production supervisor in a glass container bottle production industries hot end,and have 4 years experience in production function. I am presently employed at haldyn glass,Mumbai as a junior engineer. having 6 years experience in glass container industries. My earlier professional experience includes serving one of the Leading Industrial Group in NICHOLAS PIRAMAL,INDIA I am sending message for your kind consideration. I would appreciate if you look through my resume and advice me for an opportunity to meet with you for an interview.
28 October 2005
Ellen Cubitt
Internal Sales
Cubitt Glass And Mirror
Tenth Avenue
Durban
Natal
4001
South Africa
Tel: 0732344603
Fax: 0313129655
E-mail: scotbok@mweb.co.za
I have worked as a glass sales lady for the past 2 and a half years. looking for position in company as glass sales or internal glass sales
28 October 2005
Tariq Mehmood
Supervisor
Jhelum
Punjab
Pakistan
Tel: 00966502129649
E-mail: tariq_mehmood204@hotmail.com
i have 10 years experiance in automative glass manufaturing. i need jobs only in pakistan.
28 October 2005
Niju George
E-mail: aniesspecial@yahoo.com
I am working as quality techinican for emirates glass. specialised in double glazing unit.my job includes inspection of soft coated glass,inspection of stress on tempered glass and all drawings to be explained to the operators.i am looking forward for a better job on better package in dubai.
24 October 2005
Ioan Mocanu
Eng.
Mon International
Mioritei, 68,c,7
Bacau
5500
Romania
Tel: 0040742394284
Fax: 00402343588622
E-mail: moninternational@yahoo.com
I have 10 years experience in stained glass clasic and met. Tiffany
24 October 2005
Ankush More
Sr. Engineer
Astral Glass Pvt. Ltd.
Mumbai Agra Nh2
Igatpuri
Maharashtra
422403
India
Tel: 9881268436
Fax: Ankush More
E-mail: ankush_more11@yahoo.co.in
I have been working in glass industry for mor than 4 yrs, i am involved in production department by producing cosmetic and soda glass in I.S. MACHINE. I need a job in a same type of industry. Posistion required is a sr.engineer
24 October 2005
Tariq Mehmood
Warehouse Supervisor/manager
E-mail: tariq_mehmood204@hotmail.com
My name is tariq mehmood working 10 years in automative glass industries need sautible post in warehouse supervisor.
24 October 2005
K.mohan
Water(waste)water Treatment Operater
Midas Gold Distilleries
Krishna Nager
Chennai
Tamil Nadu
600 116
India
Tel: 91-44-55262500
E-mail: callme_rsk@hotmail.com
I'm k.mohan i m a diploma holder in chemical tech.now i m working in the field of Water (waste)Water treatment operater.i looking a best job in the same. now my grade is jr.engineer in utility dept . I have >5 yrs hands of experience.
Responsibilites: 1.To maintain and Operating the De- mineralizer Plant, Waste Water Treatment Plant,Sewage Treatment Plant and Reverse Osmosis Plant of 100 Ltrs / hour.
2.To attend any Trouble Shooting. To maintain and operating sewage treatment and effluent treatment plant.
3.To attend any trouble shooting.
20 October 2005
Ikeoluwa O. Oyerinde
Architectural Glass Products
Ike-oluwa Aluminium And Allied Products
P. o. box 17235, dugbe, ibadan.oyo
Ibadan
Oyo
23402
Nigeria
Tel: +2348037287501
Fax: +2348054437899
E-mail: ikeoluwawork@myway.com
dear sir, with refrence to employment message online. i am a managing director of my companyand its one man business but i will like to work under your kind supervision and if you can offer me and granted my applicatiion i will serve you well and you will never regret of giving me job.i have all the evidence which i can provide you if you accept my application. i will be looking forward to receive from you soon
18 October 2005
Edwin Rodeo
Artist
Al Zamil Art Glass
5th St
Dammam
Eastern
1633
Saudi Arabia
Tel: 847 4300
E-mail: rodeo@zamilal.com
Sir, I am an artist supervisor in Zamil Art glass, Saudi Arabia. I am working in this company for morethan 10 years now. I am seeking a job for some exploration and sharing techniques to other. I can assure you. You will get the best
14 October 2005
A.kothandapani
Any Suitable Post
Pragati Glass Pvt Ltd
Surat
Gujarat
India
Tel: 02629+231593
E-mail: raja_anbaya@yahoo.com
Sir, I have been working in glass industry for mor than 4 yrs, i am involved in production department by producing cosmetic and soda glass in I.S. MACHINE. I need a job in a same type of industry. Posistion required is a jr.engineer
14 October 2005
Jpagarwal
Plant Manager
Beta Glass
Agbara
Lagos
Nigeria
Tel: +2347733138
E-mail: jparaj@yahoo.co.in
I'm working as a plant manager lookinh for good apportunity.
14 October 2005
Prasad H.N.G.
E-mail: hngp04@yahoo.com
Prasad H.N.G. Having worked on furnace for over 13 years, graduated in Bachealor of Science from Bangalore University and technically obtained a Diplamo certification from The American Ceramic Society in Glass Manufacturing Technologist.
11 October 2005
Yousri Elsayed
Shift Manager
Egc
208 Hai Elsalam
Ismailia
Egypt
41523
Egypt
Tel: 0020121464455
Fax: 0020643332111
E-mail: yousriegcc@yahoo.con
i worked for egyptian float glass as shift manager for 7 years. I was shift line supervisor 450 t load float glass plant, i deal with tint, clear and LVC glass process at float bath for 7 years, i look for hot end or cold end manager job.
7 October 2005
Jeremy Angiers
Fabricator Extrodanaire
Self Employed
7913 Nursery St.
Vancouver
B.c
V5e 2b6
Canada
Tel: 604 540 6167
E-mail: jeremyangiers131@hotmail.com
5 yrs glass fabrication exp. slumping/sandblasting large scale production vancouver canada looking for more creative atmosphere!
7 October 2005
Abdullah Mohammad Asim Ansari
E-mail: asim_ama@yahoo.co.in
OBJECTIVE:- Looking for a challenging analytical position preferably in the areas of Analytical Chemistry. HIGHLIGHTS:- * More than 7 years analytical lab experience. * Extensive analytical characterization and data interpretation skills. * Strong environmental monitoring and analyses skills. * Training to customers on major equipment. * Hands-on experience on Spectrophotometer , ICP-spetrometer, GC-MS, LC-MS, HPLC, HPTLC, HPCE, GC-ECD, Atomic Absorption Spectrometer, IR and other laboratory equipments EDUCATION:- B.Sc (Chemistry) in 1987 from R.K.U, Bareilly M.Sc (Chemistry) in 1990 from R.K.U, Bareilly Ph.D/Doctorate (Analytical Chemistry) in 1995 from Jamia Millia Islamia PUBLICATIONS: 1) J.Thermal Analysis, 46 (1996) 1763 2) Indian J Chem. 34 A (1995) 423
4 October 2005
John Mogey
Forman Our Managment
Tel: 818-251-0368
E-mail: www.mogey@yahoo.com
hello, my name is john mogey , i have 30 yr, expt- store front curtain wall,, doors? i also worked as - project mananger, 4yr, i an a member of the local uion?but non uion find. hobbys ? love fishing snow skiing boating just say out doors mt bikeing i'll stop ther ? abet of my back ground/, am a former u.s.marine?1973 to 1977-last rank e-5--- have great carpenter back ground as auto, boat, truck knolwage , so i f your looking four a company man and the money good we can talk. thank you ---john mogey
4 October 2005
Neela Madhaba Panda
At-irrigation Colony Post-sankara
Sundargarh
Orissa
770020
India
Tel: 06622275173
E-mail: babuli_20042001@yahoo.com
sir , i mr. neela madhaba panda from orissa want a job in glass industries.i m a diploma holder in chemical engineering.now i m doing my graduation in chemical engineering.i m a fresher.
29 September 2005
Veikko Hasa
E-mail: veikko_hasa@hotmail.com
I am electrical engineer and I am specialized in glass temperinglines with 15 yrs experience, and seeking jobs in that area: dismantling,reinstallation, trouble shooting, manufacturing etc. Interested parties,please ask for cv.
29 September 2005
Carlos Quintero
Production engineer/ manager
Unemployed
12 Av 14-18 Zona 2
Guatemala
1002
Guatemala
Tel: 502 53175387
Fax: 502 22887236
E-mail: cquint1408@yahoo.com
Mechanical Engineer with over 18 years of working experience in different fields of the Glass Industry. Committed to the highest levels of professional and personal excellence.
Work experience:
2003-2004 VIDRIERA CENTROAMERICANA S.A. (VICESA) COSTA RICA Plant Manager
2002 - 2003 GRUPO VICALGUATEMALA-COSTA RICA Technical Corporate Manager
1994 - 2002 VIDRIERA GUATEMALTECA S.A. (VIGUA). Production Manager
1988 - 1994 VIDRIERA GUATEMALTECA S.A. (VIGUA). Head of the I.S. machines department.
Languages:English and Spanish
29 September 2005
Sagarika Brahma
E-mail: brahma_sagarika@rediffmail.com
i am sagarika brahma,have completed b.tech in ceramic technologyfrom national institute of technology rourkela searching for a job in a glass industry.
29 September 2005
Elmer P. Presbitero
Glass Furnaceengineer
Ltfi Glass Division
H. Labra St.
Cebucity
6000
Philippines
Tel:09168928757
E-mail: epresbitero@luckytableware.com.ph
I am currently holding the position of dept. head for raw materialsand furnace.I have 13 years of experience in batch preparation/formulationand furnace control,commissioning, heat-up, hot & cold repairs. I wastrained by German technicians from hotwork germany.I am wiliing torelocate with my family anywhere as long as the pay commensurates with myqualifications. thanks
23 September 2005
Vinod.s
Maintenance Engineer
Tel: +919349401190
E-mail: kurup_vinod@hotmail.com
I am a mechanical engineering diploma holder with experience in Float glass industry( guardian) nd experience in Bottle glass industry. i have more than 13 years of experience in repair and maintenance of plant equipment and better exposure in computer operation and CAD Looking for a maintenace engineer/supervisor job please help me if any
23 September 2005
Anil Tyagi
Sr. Mgr. Cold End
Gujarat Glass P Ltd.
A/61, Pratham Enclave, Atladra Road
Vadodra
Gujarat
390012
India
Tel: 912653944294
E-mail: atyagi_8869@yahoo.co.in
Anil Tyagi, email: atyagi_8869@yahoo.co.in Qly. : Btech. Mechanical ,Exp.: 13 Yrs.Exposure: cold end, production, Quality control, clean room, projects, packaging and inspection.
19 September 2005
Surendra Kumar Panda
Laboaratory Foreman
Sisco(hadeed)
Po-jubail-10053
Jubail Industrial
Dammam
31961
Saudi Arabia
Tel: 00966567465415
Fax: Surendra Kumar
E-mail: surendrapanda@hotmail.com
I have passed BSc with AIICeram by Exm & AIC by Exm, Working in SAUDI IRON & STEEL COMPANY AS Lab incharge since 1999.Before I worked in Dalmia Institute (DISIR) & OCL INDIA for 11 years .
My field of experience in ANALYTICAL CHEMISTRY, Analysing steel/refractories/cement/ferrous/nonferrous materials.I am well capable of operating Modern analytical equipments as well as wet analysis.
I AM LOOKING FOR JOB IN ANALYTICAL LABORATORY IN PRODCTION OR RESEARCH UNIT Regards SURENDRA KUMAR PANDA SISCO(HADEED) Mobile-00966567465415
19 September 2005
Joel S. Paule
E-mail: silent_lucidity45@yahoo.com
I'm previously & currently working in the Glass & Aluminum Industry since year 1998, as a Draftsman Designer.I would like to find a job outside the Philippines.Thank You.
19 September 2005
Akbar Siddiq Meempatta
Decorative Painting Designer Cum Foreman
Blue Chip
Pandikkad Road
Manjery
Kerala
0091
India
Tel: 0091 4832 700498
E-mail: siddiqedv@yahoo.com
I've worked as an Artist Designer for 7 years in Gulf Countries and 3 year in India. In Artisana't Interior Co .Jeddah worked 3 years as a Team leader of our Artist Designers group, who was engaged in Decorative painting & Designing Section. * In Jeddah I've done Interior Decorative works for 3 years, also worked in Dubai 20 months. It was the project of designing the Interior Decoration of the Five star, Four star hotels, Resorts, Night Clubs, Sheikh palaces in Saudi Arabia, Dubai malls, Shopping complex, villas etc.. During this period I worked and supervised the labours who were concerned with there project. The following were the decoration works done (for the project) by me and my supervision... Wall, ceiling painting, Water emulsion, Synthetic enamel, Oil tube painting, Canvas Drawing, Glass painting, Ragging, Sponging, Stenciling. Curved and Molded Gypsum works/Curved Wood furniture, Wood/Brass/Gypsum Statues designing and color washing
19 September 2005
Anand Rao
Engg
Etchtech
Vijiya Bank Colony Road
Bangalore
Karnataka
560076
India
Tel: 91-80-57702582
E-mail: anandrao_br@yahoo.com
hi i am anand, i have done my diploma in mechanical engg. i can design stainglass frosting, satin finishing texture etching on glass i also do etching on copper, steel brass and aluminium. i want to perfect my art along with a job can sombody teach the art of mould texturing
15 September 2005
Siddhesh S. Kochikar
Architectural Designer
Glass Metal, Design-drafting-projects.
29, 12 West Street, Croydon
Sydney
New South Wales
2132
Australia
Tel: 00614 05 355 369
E-mail: siddheshk@bigpond.com
I Offer Professional Design Drafting & Supervision Service as below: Value Engineering-Shop Drawings using AutoCad 2006- Structural calculations - Scheduling of Materials- Glass, Steel, Cladding fab drawings- Provide Bill of Materials in Excel- Site Supervision- As-Built drawings. Areas Of Specialization: Suspended Glass ceilings & Flooring(interior grade), Glass metal Canopies, Railings and partitions using glass fins,point fixings, Point fixed glazings, Glass & Stainless steel combination handrails, balustrades. Curtain walls: Unitised, semi unitised and structurally glazed. Aluminium & Composite-panels cladding works. Shop-front glazings . Frameless doors, including Dorma make Sliding, swing, patch fitting doors. (Manet, Arcos & Universal). Glazed Stacking Door systems. Stainless steel wire-rope fixings. Stainless steel column cladding, wall-cladding both interior and exterior grade.Truss works for point fixed glazing walls Stainless steel decorative works
12 September 2005
V. K. Kannan
E-mail: kannanglass@rediffmail.com
I am M.Tech (Ceramic) Engineer from India, with 10 years of experience in the Glass Industry. Can Handle Batch House, Furnace and Lab independently. Have good knowledge of trouble shooting of glass defects, furnace maintanance, operation and hot repairs.
12 September 2005
Gabrielle Wilson
E-mail: gabriellewilson@earthlink.net
I am a recent graduate from the Columbus College of Art and Design. I have studied glass blowing at school, and at Pilchuck. I have also studied sandcasting at Red Deer College. I have worked as an assistant, and have some technical knowledge. I have also worked with kiln-cast and cut glass. I am just looking to foward my career using this amazing material!
9 September 2005
Andy Clift
London
Greater London
E2 0ld
U. K.
Tel: 0044 7932 909 634
E-mail: andrewclift@yahoo.com
Having decided to put my engineering talents to good use, I've been working as a glazier/ installer for the last 6 months - learning the trade from an experienced friend. I/ we are able to build and glaze architectural aluminium structures (Kawneer) from the architects drawings through to the successful client handover. I now have experience managing teams of up to 10 fixers and labourers on projects ranging from installing rooflights through to glass curtain wall installing for TESCOS. I'm willing to work on site anwhere in the world and availible today. For what it's worth I also have 10 years top class IT/ finance experience and a graduate education. Please call or email for more information
9 September 2005
Virgil Jennings
Journeyman Machine Upkeep
Saint Gobain Containers
1906 Westwood Rd.
Farmington
Missouri
63640
St.francois
Tel: 573-756-4676
E-mail: vickysuejennings@yahoo.com
Virgil jennings current journeyman machine upkeep and operator looking to better my families future . live long skill,s in bottle production interested in a tank foreman's job or hot end specialist job have the ability to increase percent of pack and reduce hot end losses while zeroing in on defects to make things run more efficiently currently responsible for two 10 section machines job history flat river glass co from aug.1978 to 6-6-1997 went to saint gobain 6-6-1997 to present looking for possibility of becoming a bottle production manager able to train most operators to be much more effiecient
9 September 2005
Paul Antony Powditch
Glass Shop Manager
E-mail: nickspea@aol.com
25 years in flat glass industries, a dedicated and enthusiastic professional in the manufacture of high quality glass products. able to demonstrate an excellent working knowledge of quality,health&safetyreggulations,skilled in all aspects of business management from client relationships through to sales and marketing. possess excellent interpersonel skills and able to communicate and negotiate at all levels. enjoy being part of and managing, motivating,training and developing a successful and productive team. thrive in highly pressurised and challenging work environments.
6 September 2005
Antonio Delmendo
Production Manager
E-mail: delmendo-tony@comcast.net
I am looking for a job opening within the USA. I have 23 yrs. work experience in Glass manufacturing (Asahi Glass Co. - Philippines). Below is my work qualification:
QUALIFICATION HIGHLIGHTS
Float Glass Operations Management (400 toner). Hot and Cold section
Figured Glass Operations Management (150 toner). Hot to Cold section
Raw Material Control Management, specifically raw materials for float glass
Quality Assurance Management, Standard Setting Control and Implementation for all types of float glass
Production planning and Control
Total Quality Management Control and Coordination for Quality Circle teams.
Computer Literacy on Windows 95 to 2000 and Applications as Word, Excel, PowerPoint
6 September 2005
Zhangyong Tao
Manager
Anhui Huaguang Glass Group Co.,ltd
China
E-mail: taozhangyong@qq.com
I'm from china , i have been working in the field of glass industry for 11 years, i'm very familiar with the chinese glass industry, i have established the good relationships with many factorys and customers, my group setted up the branch in the U.A.E last year,and i stayed at U.A.E for half a year. now i want as a agent for a foreign company,the bussiness scope may include raw materials. eqiupment or spare parts etc.
6 September 2005
Tapas Kumardutta
Maintenance Engr.
Inovative
273/c, Bangur Park, P. O.-
E-mail: akash_dutta31@rediffmail.com
I TapasKumarDutta last four year worked with Bottle mfg.org.in hotend as a production supervisor.Now interested to worked on mainteneance dept.as a maint.Engr. Giving a chance I assure you sincerest service from my end.
6 September 2005
Mika E
Profesional Windscreen Bender
Finland
Tel: mobile +358 40 557 4008
E-mail: mikke2001@hotmail.com
Practical and experienced, automotive windscreen bender available for your company for consultancy/technical advising. Consultancy in bending techniques/tips, mold marks, mold construction ideas, operator training, test bending new products, etc. Served as a bender with several different single chamber furnacess in Pilkingtons Laitila factory former known by the name of Nordlamex. As we know Pilkington has the latest technology and high quality standards. Working with the best and producing the largest and most complicated windshields in the markets, gives a sound knowledge of automotive windshield bending. Since I left Pilkington I have done successful projects as a freelance consultant/technical advisor in Poland, South-Africa and Spain. Co-operated together with GlassRobots and familiar with operating their serial furnace. For more information, reference persons and full CV, please contact me.
1 September 2005
Sunilkumargopi
E-mail: sur_00147@rediffmail.com
i sunil was working in the field of automotive glass line in india seeking for a good job in the same. i was in the maintenance section as asst. maintenance engineer presently working in dubai aluminium co. i have experience in glass laminating using polyvinyl layer,glass bending ,cutting, tempering, bullet resistant glass,glass laboratory,glassprinting, using the latest technology plc machine from tamglass, finland, basically iam a diploma holder in electrical and electronics engg,having 5 years of experince in the industrial line, very much eager to learn the leading technology.
1 September 2005
Michael P . Juco
Glass Forming Staff Engineer
San Miguel Yamamura Asia Corp
Km 27, Anabu Ii
Imus
Cavite
1400
Philipppines
Tel: 63 3657846 09185049236
E-mail: mpjuco@yahoo.com
I am presenting myself as ahighly qualified technical personnel with special skills in glass manufacturing specializing Blow and Blow, Press and Blow, and Narrow Neck Press and Blow process.I have been with my company 18 yrs and had gained valuable experience and knowledge in glass manufacturing locally and internationally. ACCOMPLISHMENT
Extensive training in Glass forming Operation, Basic Mold design and Repair, Basic NNPB Operations, System Improvement in YAMAMURA GLASS CO. LTD. JAPAN (July 22 to August 3, 2002).
Mentor / Trainor of Glass forming personnel of: ZHAOCHING SAN MIGUEL GLASS CO. LTD. (CHINA), April and July 2002. SAN MIGUEL HAIPHONG GLASS CO. LTD. (VIETNAM), August to October 1995 and June to August 1996.
Provide Technical Assistance / Shared Technical in Glass Forming operation in ZHAOCHING SAN MIGUEL GLASS CO. LTD. CHINA, November 1995 to February 1996.
1 September 2005
Joshi N M
Qa - Manager
E-mail: nileshjoshi_dahod@rediff.com
I am QA -Manager in glass container industry in India and responsible to meet customer requirement and assure the outgoing products and also part of small improvement projects for process improvements
1 September 2005
Sahin Ali
Process Engg
29, Canal South Rd.
Kolkata
West Bengal India
700015
E-mail: write2sahincct@yahoo.com
10th. Standard from W.B.B.S.E with 1st. class (62.66%) in 1996. Diploma in Ceramic Technology from Visva-Bharati with 1st class (67.89%) in 2001 Dec.
Working Experience in Birla NGK Insulators Ltd. from 1st. Feb. 2002 to 16th. Nov 2003. B. Tech. in Ceramic Technology will be passing out 2006 July. (Up to 6th. semester avg. score 7.1).
Duration: (From 1st. Feb. 2002 to 16th. Nov 2003) 21 Months (Around 12months in SLIP HOSE & 9months in KILN & DRYERS Dept.)
Company Name: HREE INSULATORS) Rishra, West Bengal.BIRLA NGK INSULATORS (P) LTD. (Formerly JAYA S)
1 September 2005
Virgil W Jennings
Journeyman Upkeep
Saint Gobain Containershwy
1906 Westwood Rd.
Farmington
Mo.
63640
Tel: 5737564676
E-mail: vickysuejennings@yahoo.com
i began working at flat river glassco.in aug.1978 wher i began operating a 6 section quad gob is machine. working my up to a-rated operater.then i became a lead man for awhile.then i was offered a promotion to asssistent foreman a position i held until 6-6-1997 when i recieved a better paying job as a journeyman machine operater operating a 10 sec. triple gob machine making beer bottles at 440 per minute. theni became a journeyman machine upkeep a position i currently hold. however i am looking to better my future for my family and would concider a new job as process spec. or hor end manager. job a journeyman machine upkeep person
1 September 2005
Matthew Tangeman
Ceramic/glass Engineer
E-mail: mrtangeman@aol.com
Matthew Tangeman Ceramic/glass Engineer 1069 Harrison Ave Columbus Oh 43201 USA Tel: 614-975-9062 E-mail: mrtangeman@aol.com Batch & Furnace Consulting Design, Construction, Operations, Materials Selection, Quality Improvement Bubbling, Electric Boosting, Oxy-fuel firing, hot repair, heat up cool down, batch through hot end process improvement
31 August 2005
Michael P. Juco
Staff Engineering
Sanmiguel-yamamura Asia Corporation
Km. 27, Anabu Ii Imus , Cavite
1400
Philippines
Tel: 3657846
E-mail: mpjuco@yahoo.com
I am a FIlipino 40 yrs of age and presently connected with san miguel yamamura asia corp for 18 yrs.staring from production worker now i am an staff engineer. My field of specialization is on glass manufacturing (hot end division). if you wish i can send my resume for you to know me better. i am a responsible, knowledgeable,dependable glass worker
31 August 2005
Mike Askins
Blocker/skilled Worker
Southwestern Glass
Fort Smith
Arkansas
72904
U.s.a.
Tel: 4797820761
E-mail: bonnie.kincaid@sbcglobal.net
I am a skilled worker in glass manufacturing. I worked for 8 years for Southwestern glass in Arkansas, now out of bussines. I gathered and blocked, with a little blowing expierence. Can make trinkets ( bluebirds, flowers, fish, pen holders, etc.) Main expierence is in blocking big jobs such as raylites.
31 August 2005
K.meenakshisundaram
Electrical Engineer
Carborundum Universal Ltd
23-c9, Millsteet
Koilpatti
Tamilnadu
628501
India
Tel: 04632-222502
Fax: 04632-230227
Operation and preventive & Breakdown maintenance of all utility equipments like.
1.Transformer-1000 KVA
2.Generator 1100 KVA
3.HT yard -11 KV
4.HT Switch gears OCB,VCB
5.LT switch gears-ACB
6.Power Distribution Network
7.Compressor-838 CFM
8.Steam Boiler-2 TONNES
9. Induction Motor-215 HP
10. Variable Speed Drive AC/DC
11. Fire Fighting Equipments
12. Material Handling Equipments
13. Hydraulic Press-400 TONNES
14. Pneumatic Machines-1OO TONNES
15. Statutory Regulations
16. SO 9001, TPM, TQM Activities.
17. Dry house.
18. Kiln
31 August 2005
Gerardo Salonga
E-mail: jellya1415@hotmail.com
I am jerry worked in Saudi Arabia for 21/2 yrs.and 2 yrs. in Kuwait as a designer for a Stained Glass company. Design most of the stained glass items. Domes, Skylight, Glass partition, Sand blasted items and worked with kiln. Looking for better opportunity anywhere.
31 August 2005
Sandeep Raj.k
Printing On Container Glass
Tel: 9885532320
E-mail: sandeep2sun2003@yahoomail.co.in
Hi i am sandeep looking for a job, printing on container glass
31 August 2005
Maria Ana Angeles
Project Coordinator
Al Abbar Aluminium
Awir
U.a.e.
1626
Dubai
Tel: 050-3061180
E-mail: angelesmaana@yahoo.com
I am Ana Angeles and presently working as a Project Coordinator @ Al Abbar Aluminum - Project Management Group. Is there any vacancy position for a girl to work as a Site Project Coordinator? I can do autocadd, cutting list, details and even handle site management. I've been in aluminum and glass company for almost 5 years now and was able to handle unitized curtain wall and stick system curtain walls and cladding works. Presently, I'am assign as Project Coordinator at Al Rostamani Res Twr, Dubai Marina a 50 storey residential bldg.
31 August 2005
Wisam Alnaser
Syria
Tel: 0096393415065
E-mail: wis.naser@gmail.com
University of Damascus, Civil Engineering Faculty, Structural Department.
At Almoayad Glass and Aluminum Technology, Damascus, As marketing then as an executive engineer and now the manager of Daria's office of the company, (2003 till now).
At the military housing establishment, Sweda'a, As a worker supervisor. (1999 2000)
At Cyclone Company for direct marketing, Damascus, As a retail manager. (2000 2001)
At Panorama Mobile & Computer Center, Jaramana, Damascus, As a Technical Manager, (2001 2002).
As worked with many of my professors in the period of my study like professor Talal Sharaf, and professor Muhammad Gharib, As a professor assistant.
31 August 2005
Matt Wilkinson
E-mail: matt@mattwilkinson.com.au
Website: www.mattwilkinson.com
My Name Is Matt Wilkinson, I am Australian and looking to relocate somewhere interesting. I have a degree in Industrial design and Marketing. I have been in the facade industry for 3 years working on a variety of projects from specialised point fixed designs to large curtain walls. You can view my experience and credentials at above website
30 August 2005
Eby Oommen Mathew
Senior Sales & Marketing Officer
Gulf Glass Mfg. Co. Ksc
Mina Abdulla Industrial Area
Pob 26996, Safat 13130
Kuwait
Tel: 3723170 6932015
Fax: 3260456
E-mail: e_mathew70@yahoo.com
Working for one the largest Glass container manufacturing units in the Gulf. Have 11 years of experience in the Sales and Marketing of Glass Bottles and Jars. Present position:Senior Sales & Marketing Officer.
30 August 2005
Tapaskumardutta
Prod.supervisor Or Engineer
S.e.o.m.p. Tr.
11thlane,b.park
Rishra
Westbengal
712248
India
Tel: 9830718610
E-mail: akash_dutta31@rediffmail.com
Technical Education
Training Board Year Automobile Mechanism W.B.S.C.T.E. 2003-2004 Job Training Hindusthan Motor 2003-2004
Professional Qualification
N.I.I.T. Mumbai Basic, Well conversion with Ward processor, spread sheet, M.S. Office M.S. Excel, Power Point. 1996 Frankfinn Management Consultant, Kolkata Basic Cabin crew for aviation Industries, Customer Care 2001 2004
Experience :
1. Worked with Hindusthan National Glass Industries Ltd.(Deler) as a Sales Representative from 10.2.92 to 12.12.1994. Kolkata
2. Worked with Sri Durga Glass Ltd., as Production Supervisor from 8.2.95 to 29.5.96. Orissa.
3. Worked with Mahalaxmi Glass Ltd. as a Production Shift Supervisor from 17 June, 1996 to 31st Oct. 1999.
4. Worked with M/S. Gujrat Glass Ltd. (Gujrat) (as a Production Shift Supervisor ( TAPAS KUMAR DUTTA )
30 August 2005
Sohel Siddiqui
Artist
Sapna Glass
M.p. Nagar
Bhopal
Madhya Pradesh
462023
India
Tel: +919826026980
Fax: 0091-755-2611722
E-mail: sohel260@yahoo.com
I am sohel siddiqui from india. I have seen your site in uae business directory, I also deals in same field scince six years, during this span of time i have made various kind of stain glass by acid etching ,airbrushing, sandblasting, crystal work, etc.i also create some of glass product which is used hotels, showrooms.I have seen your work that was really marvellous. If you have such kind of vaccancies in your unit, I feel honour to work with you. I assure you ,I will work very scincerely with your group.I am sending you some of photgraphs which i made recently. hope to get a favourable response from your end. Thanks & Regards Sohel Siddiqui
30 August 2005
Eby Oommen Mathew
Senior Sales & Marketing Officer
Gulf Glass Mfg Co. Ksc
Safat 13130
13130
Kuwait
Tel: 965 3723170 6932015
Fax: 965 3260456
E-mail: e_mathew70@yahoo.com
Looking for a challenging career in the Sales and Marketing (Glass container Industries)
30 August 2005
Mahdi-ayazi
Construction Machinery Suprtvisor
A7-4 Apadana Tower Phase 3 Shahrak Gods
Tehran
1466734463
Iran
Tel: 09122030898
E-mail: mayyazi@yahoo.com
1.first name: mahdi
family name: ayazy
3.education degree: master of sience on mechanics of machinery from tehran university.
4. foreign languages: english :good french :not bad
5.computer courses: office 2000 ; mechanical desktop; auto cad 6. courses & skills:
6-1.passing a 6 monthes course in hepco company about hydraulic systems on heavy & construction machinery. (by certificate)
6-2. passing a 6 monthes course in caterpillar company about engine and its attachments on heavy & construction machinery (by certificate).
6-3.passing a 3 monthes in guildhall mechanization center about repairment of heavy equipment machinery.
7. experiences: manager of machinery in tarhopalayesh engineering company on binak associated gas gathering&transportation (epc contractor) for 3 years. i supervise machinery section & personels on shop & office center.
30 August 2005
Franz Meier
E-mail: trompie20002000@yahoo.co.uk
my name is franz meier,i have worked for consol glass in bellville sax circle about nine years ago as a i.s machine operator hot side. i am looking for work in holland or anywhere in europe i have a european passport so no work permit needed.i worked for consol glass for about two and half years and achieved a grade 12 qulification.been in glazing industry since then glazing,insalations and breakouts etc. i am living an the uk now and prepared to move where the work is, my email address is trompie20002000@yahoo.co.uk
30 August 2005
Mouhamad Shafik
E-mail: shafik3@yandex.ru
Mouhamad Shafik 34 years An engineer of chemical technology graduated from St.Peterbourg-Russia 5 years experience in glass industry. production manager for 3 years. languages:Arabic,English and french.
30 August 2005
Mohammad Al-hindi
General Supervisor
Makkah Car Paint Factory
Makkah
KSA
Tel: + 966 504 77 87 54
E-mail: mohammadtayeb@yahoo.com
To obtain a position with an industrial leader in a dynamic environment in areas of chemical applications and research where my knowledge and skills can be enhanced and utilized to contribute to the company's chemical processes operation
30 August 2005
John Mogey
Project Manager Of Glass and Metal
Wooden Mirrour
9238 Telfair
Sun Valley
Calif
91353
USA
Tel: 818 251-0368
E-mail: mogeyj@yahoo.com
hello; iam looking for work have expert tee in all around the glass bis'-work on storefront hi rises installaions ? and yes i can cut glass read blue prints. work as a project manager for the last 3 yr? if you might need a geart man in this field, hope to here back from you
30 August 2005
Edilberto R. Catabay
Designer
Folcrabeach Industrial Llc
Abu Dhabi
Musaffah Industrial City
United Arab Emirates
Tel: +97150-8251071
E-mail: ercatabay_52971@yahoo.com
Good day i'm Mr. Edilberto R. Catabay, filipino citizen and im here in Abu Dhabi working as a Designer for a aluminium & glass company based here in musaffah, i have 10 years of extensive experience for the said field, i am familiar with curtain wall system (unitized, schuco, conventional type) and other allied aarchitectural aluminium feature. i've been working here at least 2 years.
29 August 2005
Edilberto R. Catabay
Designer
Tel: +971508251071
E-mail: ercatabay_52971@yahoo.com
I am Edilberto R. Catabay, filipino citizen and im working in aluminium & glass contractor as Architectural Designer / Detailer, I have 10-years of extensive experience for the said fields of operation locally and in abroad, I'm willing to bring my skills and experience to work for your company.
I am flexible with high level of confidence and self esteem, eager to learn for my career growth enhancement, my outgoing and friendly nature allows me to interact well with other staff member at all levels, I can work under time pressure and able to work with minimum supervision, also I can add or extend an extra hour of work to meet the desire schedule.
The accompanying resume can serve to provide you with greater details of my experience and background, and what I have to offer, feel free to contact me.
Thank you very much for your time and consideration, hope to hear from your good office on a positive matter.
29 August 2005
Branko Jakshich
Worker On Production Of
Isolation Glass
Konstantina Danila 9
Panchevo
Vojvodina
26000
Yugoslavia
Tel: 063319320
E-mail: nile@3dnet.co.yu
I've been a full time isolation glass production worker (for23years),and now with my expirience and knowledge of this area, I've been leading production in two shifts in one of the greatest private company in my country(Serbia).
My knowledge of this area as working technician is vast
I will name some of them:
-Manufacture of stuctural glazing(from which I have gained certificate of
Belgian company Dow Corning last year)
-Isolation glass in all forms
-Decoration frames in isolation glass of many shapes
-Isolation glass with SHIKO frames....
-In the wery process of production I'm working and I am an expert in all working places:
-Manual extruder insulting with two components of silicone and two components of tiocol
-Manual construction of all tipes of frames
-Butiliring the frames
-Putting the frames on glass
-I manually put together and insult with structural Dow Corning silicone 3362 & 993 structural isolation glass
-And I also work in putting the glass in buildings
29 August 2005
Manish Kumar Shetty
Production
Supervisor
Saif And Partners Glass L.l.c.
E-mail: manishshetty_79@yahoo.com
working in the Glass Industry From May 7th 2003.
Experience in Operation, Repair And Maintenence of The Following Machines.
*TR/87/Bavelloni grinding Machine.
*TB/66/Bavelloni BEvelling And Edging M/C.
*SB2AL10 Shape Grinding M/C.
*Baretto Profelli Grinding M/C.
*Schiatti Drilling M/c.
* Maver R400 Automatic Cutting M/C.
*Fusion2000 Machine
* Automatic And Manual Sand Blasting M/c.
*Air compressors.
Qualification:Bachelor Of Engineering in Industrial and Production Engineering.
*Good Command over written and spoken English. Scored band 7 in IELTS exam
2003
29 August 2005
Hemant Somani
Quality Control Officer
Hindusthan National Glass & Industries Ltd.
Rishra - Hooghly
Kolkata
W.b
712248
India
Tel: 00919339773172
E-mail: hemantsomani@sify.com
I am Working as Quality Control officer in One of the leading container glass mfg co. in India and have a experience of about 10 years in this line. I want to change immediately.
29 August 2005
Breedlove
E-mail: cbreedlove@gmail.com
I am interested in finding any glass blowers in Chicago who may be able to apprentice or teach me their art. Does anyone know who I could contact? I have just moved into the city.
29 August 2005
Rajbir Singh
Glazier
23, Donna Drive
Brampton
Ontorio
L6z3t4
Canada
Tel: 905 495 6229
E-mail: rajuriar@yahoo.ca
looking for job as glazier,having one year experience.
29 August 2005
R.praveen Kumar
Quality Assurance
Jindal Alumnium Company Limited
Jindal Nagar,Tumkur Road
Bangalore
Karnataga
520072
Tel: 9845613797
E-mail: crkpraveen@rediffmail.com
I am praveen kumar,i had complete my B.E in 2004, and Iam having one year experience in the aluminium extrusion and glass industry where jindal aluminium extrusion and glass materials as a quality assurance and r&d in the field of glass and metallurgy and aluminium alloys and well expert in the iso9001 file maintanence and well handling of gas chromatograpy and ultrasonic detection machine,able to run a batch reactors,brinell,vigers,barcole,hardness testers and tensile testing machines and i am looking for foreign oppurtunity to use my skills and knowledge
29 August 2005
Tapaskumardutta
Production Or
Mainteneance
11th lane,bangurpark,
Rishra
West-bengal
712248
India
Tel: 9830718610
E-mail: akash_dutta31@rediffmail.com
Most respectfully I beg to state that I worked with GlassBottle Mfg.Ind as a ProductionSupervisor in hotend erea last four year,in various glass Ind.in India.
Now Under your kindcontrol I interested to work on Canada,Aus.U.S.Finland leading glassbottle ind.Its my dream to work on abroad.
29 July 2005
Ronald Aker
E-mail: raker@bendbroadband.com
I am retired. Seeking part time sales position calling on glass houses, architects and general contractors. 46 yrs. experience in all phases of contract glazing business except installation. Last position before retiring was district sales rep. for Kawneer Inc. Seeking to rep. any product aligned with the glazing business. Residence, Central Oregon.
29 July 2005
Sophie Hoyt
Producer
Exposure Films
2313 Cr 207
Durango
Co
81301
USA
Tel: 970 375 2720
Fax: 970 375 2720
E-mail: sophiehoyt@hotmail.com
Im 27 and live in Durango, Colorado, and want to be an apprentice for an established glassblower and kiln caster (preferably in the durango area, but anywhere in CO is wonderful). I have done some previous work in glassblowing, and am eager to learn more from somebody who wants to teach! I have some great ideas, and wish to work with somone who is passionate about what they do. I am English/American and hold both passports, so visa's are not even a thought. Come on, who wants to pass on some knowledge?!
29 July 2005
Tapas Kumar Dutta
Prod.supervisor
Bangurpark,11 Lane
Riahra
West-bengal
712248
India
Tel: 9830718610
E-mail: akash_dutta31@rediffmail.com
Respected Sir,
Ibeg to state that I TapasKumarDutta son of late AnilKr Dutta & late Smrit Kana Dutta
I worked with Glassfactory last 4 year various company in India like ShreeDurga
Glass, MahalaxmiGlass, GujaratGlass,a s a Production Supervisor. Now under
your kind control keen to work on U.S., Canada,Australia,or Finland
Sir I pray your early action on this matter, waiting for your early response.
29 July 2005
Anandakumar.sivan
Deputy Manager
Arc International
Rasal Khaimah
3248
U.A.E
Tel: 0097172445496
Fax: 0097172446611
E-mail: anand_sivan2000@yahoo.com
I am a diploma holder in chemical engineering with 15 years of industrial experience.
experience:-
total no.of years 15.
in Arc international middle east -8 years.
i started my carrier in arc as a chief co-ordinator in the erection field of the first plant in u.a.e.
carrier growth in Arc international middle east.l.l.c
1 chief Æco-ordinator in the erection field of the first plant
2 quality control & tempering process department head
3 decorating , stock & temepering process department head
4 consultant for the packing,stock,tempering,quality,decorating
departments.
5 production incharge for primary and decorating
6 plant manager for Arc-1
7 deputy manager for Arc- 1,2 & 3 full operations.
25 July 2005
Ayesh Yousef
Assistant Technical
Manager
Gulf Glass Industries
Sharjah
United Arab Emirates
Tel: ++971056770645
E-mail: ayesh@gulfglass.com
Assistant Technical Manager
Specifying projects with consultants
Preparing and editing all technical related matters.
Issuing performance data of various glass types by using the LBNL Optics, and Window 5.2 Fenestration Product Thermal Analysis Program, and or from published data
Supporting the sales team with all technical related issues.
Identifying and proposing glass types for the estimation department for quotation purposes.
Issuing warranty Certificates, Compliance statements and other official related documentation.
25 July 2005
Prabhakar
Entry Level
4th Street Sri Sakthi Nagar,
Chennai
Tamilnadu
600109
India
Tel: 044-26370266
E-mail: prabhakara81@yahoo.com
Seeking a responsible position in an organization providing innovative and challenging opportunities to excel my talent in the field of Ceramic Technology and in its allied field also for the upliftment for the organisation
EDUCATIONAL QUALIFICATIONS:
M.Tech (Ceramic Technology) : Passed out from Anna University, Chennai
Tamilnadu with an aggregate of 7.8 cgpa, in June 2005
B.E. (Chemical Engineering): Passed out with First class from Annamalai
University, Chidambaram ,Tamilnadu with an aggregate of 65.75% in 2003
25 July 2005
Sandip Banerjee
Quality Mnager - Container
Glass
Hindusthan National Glass & Industries Ltd.
A-15/2, Kalindi Housing Estate
Kolkata 700089
West Bengal
India
Tel: 25227346
E-mail: banerjeesandip@hotmail.com
DOB 21.09.71
PGDBM (MBA) with OR - IISWBM, Kolkata, 98-2000.
M.Tech in Ceramic Technology from Indian Institute of Technology, BHU,
94-96.
In Charge of QC as Asst. Manager in HNGIL, Rishra for last Four years.
HNGIL, Rishra is container glass plant (ISO 9001:2000) of capacity approximately 600 TPD (3 GTF) of total draw for amber, green and flint.
Unit has an ACL unit.
Job Profile (Main)
Administration.
KPI monitoring.
Coordinator - QM Pillar - TPM
Trainer - Basics Statistics SPC Tools.
Internal Auditor
SPC
Analysis of Complain
Review of Work Method
Involved in achieving in HNGIL, till time
02-03 03-04 04-05
Complain (Nos.) 84 68 47
Complain Index (Despatched (Mt)/Complain ) 1297 1985 3863
Efficiency 79% 84% 85%
T/O (1000 Mt) 109 135 182
Hold/Draw(%) 2.45% 1.09% 0.97%
Recovery 85% 91% 94%
Pharma T/O increased 3 times 04-05
Stabilisation of 4 new line (2 TG & 2 DG) within 20 d after start up
Tank II - Amber May’04.
25 July 2005
M. Azam
E-mail: azam2k@yahoo.com
I am Mohd. Azam ,30yrs , working as Asstt. Manager Sales in reputed glass (container) plant of India.
I have 6.5yrs experience in hard core selling of glass bottles & Jars. I am professionally qualified B.Com , P.G.D.B.M. (Eq. M.B.A.- full time.)
Interested in challenging position.
22 July 2005
Mahmoud Torkaman
Cansultant
Khorambid Fiber Glass Co.
Cross Labafi Sterit & Jomhory
Tehran
18636
Iran
Tel: 00989123816577
Fax: 02813682070
E-mail: torkaman72@hotmail.com
mahmoud torkaman
im m.s of ceramic eng.
i have 12 y experience of glass industry in iran
6y in gazvin glass co.
4y in blorock glass co.
1y in gamin glass co.
1y khorambid fiber glass co.
i m 34y old.
22 July 2005
Kushan Hapuarachchi
Glass Designer
Ranwatta & Company (pvt) Ltd
141/3, Vauxhall Street
Colombo
Western Province
16400
Sri Lanka
Tel: 94112851286
Fax: 94114716922
Im a 27 year old B.Sc. Engineer who is having hands of experiance in the tempered glass industry. I have an exallant knowladge in the industry and its accessories. I use the language of Autolisp to automate repattive tasks in AutoCAD drawings. Also I possess a visa in the UK, and am expecting to migrate to the UK in November.
19 July 2005
Timothy John Lynch
416 Bridlewood Court S.W.
Calgary
Alberta
T2Y 3Z3
Canada
Tel: 1-403-689-7800
E-mail: mirrorman47@hotmail.com
Have spent 35 years in the glass industry.
Worked in a factory that manufacutured bottles consisting of beer, wine, and medicine containers.
Managed and operated retail outlets.
Set up distrubution of wholesale glass equipment for the glass shops to purchase from.
Owned, and built up two glass shops in Alberta to supply the construction and designer community with machined products of beveled, polished glass and mirror products, along with the latest 10/12mm glass shower doors. Sales and management have always been my strong suit, and understanding of what risk management intails. Able to relocate. Have a strong knowledge and background of the machine industry.
15 July 2005
Baskaran
Scientific Glass Blower
M/s. Technico Laboratory Products (pvt) Ltd
10/125, Madurai
Meenakshi Street,
Chennai
Tamil Nadu
600 097
India
Tel: 22323318
E-mail: baskarpvs@yahoo.co.in
TECHNICAL QUALIFICATION:
Undergone 2 Years Training Course in ;The Manufacture of Scientific Glass Apparatus; in Government Scientific Glass Training Centre, Guindy, Madras - 600032 in the year 1992 August.
Typewriting Higher in English
Experience as a Glass Blower.:
2003 to Till Date:M/s.Technico Laboratory Products (Pvt) Ltd., Ekkattuthangal, Chennai - 600 097.
2001 - 2003:M/s.Tensil Glass Works, Ulsoor, Bangalore - 560 008.
2000 - 2001:M/s.Venflow Scientific Products, Dooravani Nagar, Bangalore - 560 016.
1997 - 1999:M/s.Tensil Glass Works,Ulsoor, Bangalore - 560 008.
1992 - 1996:M/s.Vensil Glass Works (Pvt.)Ltd.,Dooravani Nagar, Bangalore - 560 016.
15 July 2005
Kehinde Samuel
Site Fitter and Fabricator
Kenad Aluminium Co
No 9 Osunnowo Street Giwa
Oke-aro
Ogun
P.O Box 1153 Agege
Nigeria
Tel: 234-8037168026
E-mail: kennysam2003@yahoo.co.uk
i deal with all aluminium building component and frameless glass. these include windows doors curtain wall of any kind and frameless door and showel and other frameless building component having work with metalum using schuco accesories and other company accesories and profiles
13 July 2005
Chris Screnci
Project Manager
Quebec
Tel: 450-753-7769
E-mail: bluenose16@hotmail.com
i have worked in the glass and aluminum industry since 1982. i have managed projects from 5000 to 7 million from storefronts to high rise, looking for serious and professional company to grow and prosper with, willing to relocate
13 July 2005
Tarun Negi
Production Executive
Hindustan National Glass
A-11, J.K. Puram
Haldwani
Uttaranchal
263139
India
Tel: +919412951092
E-mail: negiarunn@rediffmail.com
I am BTech (Production engineering)working as a Production Executive in a Botle Glass manufacturing company, Hindustan National Glass (earlier Owens Brockway).I have nearly 4 years of experience looking after whole production of glass containers (bottle glass) ready to work in shifts to.
13 July 2005
Santosh R Dubey
Sr. Production & Planning
Engineer
Borosil
E-mail: santoshrdubey@rediffmail.com
looking for suitable post in glass industry
7 July 2005
Ashfaq Gauri
Chemical Engineer
Ashruby
Chemtech (india)
57, Rihaaish, Vebhav Nagar, Police Line
Kota
Rajsthan
324001
India
Tel: 91 9414187869
Fax: 917442364897
E-mail: gauriashfaq@indiatimes.com
I am Ashfaq Gauri from India. i am diploma in chemical engineering with 72%. i have good experience in water treatment chemical, fuel treatment chemicals sales and service in industrial segment.
i am expertise in water and fuel treatment monitoring in various industries.....5 years experience
i want good and suitable job related to process and manufacturing industry.
7 July 2005
Aneesh Antony
Estimation Engineer
Company:
Alu-tec W.l.l.
Doha
40625
Qatar
Tel: +974-5629628
E-mail: aneesh_p_a@yahoo.com
I am working as an engineer in the contracts department of one of the largest curtain walling firm at Qatar. My responsibilities includes, quantity surveying, estimation, procurement and billing of all curtain wall & cladding works. Familiar with estimation softwares, AutoCAD, MS Office, Adobe Photoshop etc. Looking for more interesting and challenging enviornment....
7 July 2005
R. K. Gupta
Consultant
G1 /7
Shirine Garden I.t.i Road Aundh
Pune
Maharashtra
411007
India
Tel: 00 91 9850717521
E-mail: rajan3348@yahoo.co.in
I am a mech. Engineer with over 37 years experience in various reputed glass container manfacturing companies out of which 14 years overseas in senior Technical positions especially in I.S. maint, With wide experience in maintenance mechanical, electrical, instuments, civil ,workshop, I.S. machines mech. & electronic operated S/G ,D/G,T/G also looking after compressors, blowers, conveyors, & project, planning, erection, commisioning of different type of equipments
Interested in taking C& F agency or distribution after sales sevice of m/c for any product used in glass plant for India/Middle east /Africa.
4 July 2005
Edwin Naperi
E-mail: ednap68@gmail.com
I am Edwin Naperi. I have 13 years experience in aluminium curtainwalling specifically structural design. I welcome part time jobs through internet. I am based in hongkong.
4 July 2005
Abdul Lateef Olatunji
E-mail: lataluminium@yahoo.co.uk
Dear Sir, My name is abdul lateef olatunji and I am interested in training or employment with your prestigious organisation. I am also willing to relocate. I have been in the Aluminium and glass glazing fabricator industry for 12 years. My accomplishments are in the area of Quality management at LAT ALUMINIUM NIG. ENTERPRISES, a window manufacturing company. I have been an asset to this company for 12 years. I have issues in the area of quality that are motivating me to seek employment with another company.
4 July 2005
Chukla Shrinivas Somaiah
Customer Service
Executive
390/9 Hawaldar Chawl, Gave Devi Dongri, Cama
Road
Mumbai
Maharashtra
400058
India
Tel: 0091 22 26716892
E-mail: srinivas_mnglx@yahoo.com
5 Years Exeperience in Tempering Glass in Dubai UAE
Can Handle the following jobs
Customer Service
Quotation with followup, Production coordination, Payment followup,
Customer Feedback and other related responsibilities
30 June 2005
Mike Rowland
E-mail: mikerowland@blueyonder.co.uk
Can you afford not to employ me?
i have been in the glass processing field for over 20 years. with the past 12 years working in a dgu factory covering all aspects of glass working from cutting and temepering to unit assembly. i have worked all manner of lisec machines from spacer bar benders to auto jumbo cutting tables sealing robots to ksl edgeworking machines and have had experience in fault-finding at maintenance too. for the past 3 years i have been supervising a toughening operation in the uk with an output of approx
15,000 dgus per week. would prefer uk but will consider australia also.
Thanks
30 June 2005
Karani Jayachandrudu
Glass Technologist
Agi Glaspac
Mothinagar
Hyderabad
Andrapradesh
500018
India
Tel: +91 9440747500
E-mail: jayachandra_karani@yahoo.co.in
I have 4years experience as a shift glass technologist and capability in shift handling of batchhouse. Knowledge on iso systems also. Please considered my message and give response positively
27 June 2005
Kotha.kishore Kumar
Glass Technologist
Agi Glaspac
Sanathnagar
Hyderabad
Andhrapradesh
500018
India
Tel: +919885679823
E-mail: kotha.kishore kumar
hi, am kishore working as a glass tech(shift) seeking good oppurtunity and having 4 1/2 year experiance hope early and happy reply
27 June 2005
Ronaldo Tamayo
Planer/scheduler
Arc
International Middle East Llc
Box 3248
Ras
Alkhaimah
United Arab Emirates
E-mail: Brodel_bro@yahoo.com
My work experieces includes Production Planning, Inventory Control, Warehouse and Materials Management. I had been working as a Planner-Scheduler for Packaging and Packing in a Multinational Company in United Arab Emirates. Working closely with the Office of Logistics/Supply Chain Department, my section is continuously provide guidance and support to the Operations by designing cost-efficient and timely Planning schemes and by interfacing with the Purchasing, Warehouse. Provide plans for Materials acquisition, Inventory Management and Packing Management., obtain accurate Sales Demand and Forecasts from the Office of Supply and Industry for advance materials requirement planning.
I am responsible for the management of materials inventory to minimize inventory level, delay and obsolescence. I am responsible for the preparation of Materials plans and Packing plans derived from the Firm and Forecast orders and evaluate performance based on the given daily output of production.
27 June 2005
Dan Gipe
E-mail: joedan_64503@yahoo.com
I have 17 years experience in contract estimating in the glass and aluminum storefront and would enjoy getting back to what I know best. I am looking for a position in the state of Missouri.
22 June 2005
Ravindrnath N. Panicker
General Manager-
Operations
Mumbai
Maharashtra
400099
India
Tel: 98200 24254
E-mail: brains6373@hotmail.com
I am a specialist in glass bending and tempering(Industiral/Architechtural). Having indepth knowledge in this field and more than 27 years of experience with a midsized glass co., in mumbai.
As this co., is shifted to gujarat recently, I am looking out for an international opening to share my vast experience in this field with an enterprising co and ready to relocate anywhere in the world, preferably in middleeast/gulf,africa,south east asia,europe.
In my 27 years of experience, last 16 years have been mainly in production and administration. I have travelled widely to europe and scandinavian countries for procurement of latest machineries and for export of our products internationally.
22 June 2005
Rashid Chishti
Screen Printing
Consultant
Ebdah Adv
Ba Khshab
Jedah
KSA
Tel: 00966502511960
Fax: 026801239
E-mail: rashidnjoo@yahoo.com
my name rashid chishti , i am consultant of screen printing on glass & lastic bottles, glass containers, perfums bottles, shampoo bottles ,nowadays i am working as tech . manager in saudia, i am from pakistan, if anybody wants to start any project plz call me for consultation to start glass printing , production planning, selection of machines & inks for glass printing .due to the knowledge of turkish, english. arabic languages there is no prob for me to go anywhere in the world on short contract base
thanks
22 June 2005
Mohamed Eltohamy
Dr
National Research Center
Bohowth St.,
Dokki
Giza
Egypt
Tel: +20106077368
Fax: +2028114384
E-mail: mtohamypostdoc@yahoo.com
I am looking for better job opportunity. I am Researcher (Ph.D. Holder) In Glass Science and Technology and development filed since1991.
I have knowledge of glass manufacturing industry.
My Research work focused on the Industrial solution of the glass industry, Development of the new product and manufacturing.
We already developed a new glass systems for many application.
I have work experience in batch formulation, batch house, furnace, raw material analysis.
20 June 2005
Marundheesan.r
IS M/c Operator/Fitter
Altajir Glass
Dubai
28862
UAE
E-mail: mavmillen@yahoo.co.in
I am an operator/fitter in IS M/c since1993. I have sound knowledge of glass manufacturing industry, especially IS M/c which is made from Owens-illinois,.USA.At present iam working in DUBAI, UAE.
20 June 2005
Puspagauri. S. Vaghela
Quality Control Eng
E-mail: sanjivvaghea@yahoo.co.in
i am pushpagauri.s.vaghela,i have 5 yers experience in ceramics co. i have worked as quality control eng in pino bissazza glass in india,basicaly i am diploma in ceramic.looking good oppertunity in india or abrod.recently , i am in sweden with my husband
20 June 2005
Basavasudhakar Paruchuri
Plot No-163,hmtsathavahananagar Colony
Hyderbad
Andhra Pradesh
India
Tel: 9392463002
E-mail: sudhakar.basava@rediffmail.com
I am basavasudhakar, I have 4years experience in the field Electonics & Instrumentation. 2 & 1/2 years experience in glass industry. I have experience with emhart T-300/1, T-300/2&T-600 machine timing systems, BDFservo stackers & 90 degrees pushers. we are having two SORG furnaces. I have experience with temperature scanners, weighing systems, Thermocouples, RTDs, all types AC drives.
13 June 2005
Saugato Dutt
E-mail: saudutt@hotmail.com
I am a graduate Engineer with 12 years of experience in Glass container manufacturing. I have worked in both I.S.Maintenance and production departments. I started my carreer with HNG in 1993 and later moved on to Gujarat glass Ltd in 1997 and have been there till date. My present position is Manager (Production)
10 June 2005
Brent E Jardine
Journeyman Glazier
E-mail: brentjardine@hotmail.com
Canadian man 23years in the glass trade certified glazier curtain wall, storefront , visionwall, looking to oversee northamerican companies, projects in shanghai china.
10 June 2005
Lubomir Borisine
Glass
Worker
LR Crystal Slovakia
Slovakia
Tel: 00421424634943
E-mail: jana_nana79@hotmail.com
My name is Lubomir Borisinec and I have ten years experience working in the glass house. I would like to work for you and I could start in September.
10 June 2005
Saugato Dutt
Manager Production
Gujarat Glass Pvt. Ltd.
C-601 Kalpvrux, Gotri Main Road
Vadodara
Gujarat
390021
India
Tel: 0091265 2325661
I am a glass forming specialist with over 12 years of experience in bottle forming and I.S.Maintenance. In 1993 I joined as a GET, HNG,Rishra unit. Thereafter I took over as Shift prod. Engineer and later as production Engineer in charge of I.S.maintenance. I was made the Sr. Production Engineer in 1996 with 3( mechanical type) I.S.machines under my supervision before moving on to GGL, Jambusar unit in 1997.
Here I worked in projects, machine building and commissioning of SIX electronic I.S.Machines. As a Sr. production engineer I was in-charge of TWO I.S.Machines (10 Sec T.G. & 10 Sec D.G.) and later went on to manage the I.S.M. dept. as Dy. Manager from 2001. Here I got promoted to the post of Manager and in 2004 I switched over to Production with the responsibility of 2 I.S.Machines (10 Sec D.G. running on P&B and B&B and 10 Sec T.G.).
Saugato Dutt
Date of birth - 20th Jan 1969
Marital Status - Married
Qualification- B.E.(Mechanical)
Passport No. F2549444
10 June 2005
Satish Kumar Chauhan
ACL(screen Printing on Soft Drink/beer Bottles)
Ace Glass Containers Ltd.
Thodamantham
Pondicherry
605502
India
Tel: 04132677396
Fax: 04232677666
E-mail: satish_kumar_chauhan@yahoo.com
I am B.E (Mech.). I have 9 years experience in containers manufacturing units as a Manager-ACL in India's largest group HNG & Industries and as a Dy. Manager &; ACL in Al tajir Glass (DUBAI) for 2 years . I have good knowledge of printing operation as well as maintenance of printing machines Strutz/Rosario (4CL200,3CS150,3CS125 & 3CS100 models , gas/electric lehrs, push bar stackers and conveyors.
Details of my Experience ;
a. OBL, Rishikesh ; 4.5 years as a Engineer
b. Universal Glass, Sahibabad ; 6 months as a Sr. Engineer
c. HNG, Bahadurgarh; 4 years as a Manager
d. AL TAJIR Glass, DUBAI - 2 years as a Dy. Manager
e. ACE GLASS CONT. LTD., PONDICHERRY - From Jan. 2005 to continue till
date as a Manager.
Personal Details:
Date of birth : 5-7-1970
Marital status : married
I am looking for better job opportunity in abroad or in India.
10 June 2005
Munteanu Ileana Dacia
General Director
Trust Rom Impex Srl
Calea Victoriei 32-34
Bucharest
010081
Romaina
Tel:
0040213148046
Fax: 0040213101009
E-mail: office@trustrom.ro
Working in glass industry since 1971, as seller, knowing the merceology of products-export/import - dept. very good english, active personality, ready to develop any market and new lines products.
6 June 2005
Amin
Glass Mould Designer
Shesh Va Gaz
Saraseyab
Mehrabade Jonobe .sherkate Sheshe Va Gaz
Tehran
13185 1783
Iran
Tel: 09121776489
Fax: 6692497
E-mail: amin_taymouri@.com
Website: www.artglass.i8.com
im amin teymouri .im male 38year old and im expert to design any glass mould with cad cam.and p[ower shape and power mill.is very easy to me disigning and making any mould holder. spicialy in field of press machine.also i can design any art glass to produsing with handell press.and ihave 20 year old experiance in field of production and mould.
i have 21year in 2 great company
1-kaveh group
2_shoga
im ready to work in any foregen country. you can see one kind of my art glass design at the above website.
6 June 2005
Anthony Elliott
CM19 5PA
England
E-mail: Tonelliott@aol.com
I am a 41 year old fully skilled glassblower with over 20 years experience in the manufactoring of quartz and borosilicate glass apparatus.
I am looking to further my career in a major company either here in the UK or if possible abroad.
6 June 2005
Jerry F. Myers
Senior Glass Global Sales
Manager
Nth.degree Products
3 Bali Drive
Palm
Springs
California
92264
USA.
Tel: 760 320 5276
Fax: 760 778 0362
E-mail: GlassPartsEtc@aol.com
I have been in the Glass and Glass Related business for some 40 years, Managing Glass factories, Overseeing Glass Production, Quality Asurrance, Consulting. Sales, Training and have gained a vast knowkedge of the Glass Industry World Wide. Resume on request.
6 June 2005
Anil Tyagi
Sr. Mgr
Gujarat Glass Pvt. Ltd
A/61 Prathamenclave
Vadodra
Gujarat
390012
India
Tel: 912655581568
Cell: 09824650666
Fax: 912644233309
E-mail: atyagi_8869@yahoo.co.in
Anil Tyagi
Vadodra (Gujarat)
Professional Qualification
1.. Tech. In Mechanical
Experience:
1. HNG Bahadurgarh.
2.GUJARAT GLASS (P) LTD First Carrier Path:
Aug-92 to Fab-93, Trainee Engineer (Production).
Fab-93 to Jan-95,Shift Engineer(Production).
Jan-95 to Jul-96 Engineer (Cold End).
Jul-96 to Jul-97 Senior Engineer (Cold End).
Jul-97 to Oct-98 Asst. Manager (Cold End).
Nov-98 to Jun-2000 Manager (Cold End).
Jul-2000 to till today Senior Manager (Cold End, Quality control and Clean room).
Jan-2005 Got additional responsibility of Gujarat Glass Kosamba for incoming projects for cold end.
PERSONAL DETAILS
Father's Name Sh. Hirday Prakash Tyagi
Date of Birth 08th Aug. 1969
x Male
Marital Status Married
Languages Known English, Hindi
Present Salary Rs6.07 lacs per annum
6 June 2005
Marco Mazzoni
Is Machine
50054
Italy
Tel: 393927884255
E-mail: mazzoni_marco@virgilio.it
20 years of experince on IS machine, Emhart, Bottero and BDF.
Machine conductor and production manager for hollow glass.
I am to be able of maintenance and regenerated IS machine and Feeder.
6 June 2005
KSS
E-mail: ks_abh@yahoo.com
I am apost graduate in chemistry and having twenty years in reputed glass industry in india having work experince in batch formulation, batch house, furnace, raw material analysis.Pollution control measures in air, water and solid waste.waste water treatment and water treatment plant, analysis of water.
27 May 2005
Sanjeev Kumar Arora
Assistant
Manager (Prod.)
M/s Kioo Ltd. (Tanzania)
K.d. Nagar
Ganaur (Sonipat)
Haryana
131101
India
Tel: 91 9896130404
E-mail: sanjeevarora_1972@yahoo.com
I have 11 years of experience in containers maufacturing units as a production engineer in asia's largest plant HNG & INDS. LTD.(INDIA) and as an assistant
manager (production) in KIOO LTD.(TANZANIA) for five and half years each. Now I am looking for a better job abroad or in INDIA.I have worked on all type of machines (I.S.) SG, DG, TG.
27 May 2005
Polline Wangoe
Nor Applicable
Nairobi
55272-00200
Kenya
E-mail: nasata20@yahoo.com
I am a 25 year old lady living in kenya. I'm not exactly looking for employment but an opportunity to learn glass art as an apprentice.
27 May 2005
Krishna Bahadur
Machine Operator/
Supervisor
M/s. Emirates Glass Llc
Dubai
Po Box.29769
U.A.E
Tel: 00971 50 8541740
Fax: 00971 4 3471440
E-mail: krishna_igu@yahoo.com
I am aged 25 years having a nationality of Nepal, working in M/s.Emirates Glass LLC,Dubai,since 2000 to till date(6 years of work experience).I am having full knowledge about architectural glass processes like normal,shaped,stepped & safety glass having low-e and reflective coatings and able to analyse drawings, views etc., Currently operating LISEC insulating glass m/c line perfectly and also took the incharge of an acting Supervisor of IGU section.
In view of better opportunity, I would like to relocate immediately. Recruiters, please contact me at above address.
27 May 2005
J Singh
E-mail: vgpl1@sify.com
I am an Engineer with long experience of establishing complete glass processing factories like Tempering, laminating & Insulating equipment.
I have just completed two projects in INDIA.
I can work on retainership basis for the project execution from planning to production.
27 May 2005
Andrew Ward
Glazier/fixer
Ganners Grove
Leeds
Yorkshire
LS13 2PW
UK
Tel: 01132573584
E-mail: andrew.ward323@ntlworld.com
hi my name is andy. I have worked in curtainwalling and stuctural glazing of the planar system for 18 years. I'm 40 years old and am willing to travel anywhere
23 May 2005
M. M. Ganapathy
Glass Technologist
E-mail: kalapudi@yahoo.co.in
qualified ceramic engineer having more than 30yrs exp in most modern automatic glass container plants not onn india but also kuwait, saudi arabia and thailand etc. participated 2saintgobain projects 3 n.sorg germany projects,have knowledge of furnace construction ,efficient operation,maintenance, self developed quick colour change technic of amber,greenand flint glass.
Job req part /full time in india or abroad
Exp in batch composition and cost reduction also.
23 May 2005
Anthony Elliott
Glassblower
England
Tel: 07748212698
E-mail: Tonelliott@aol.com
I am a fully skilled glassblower with over 20 years experience in quartz and borosilicate glass.
I am looking to further my career either here in the UK or if possible abroad
20 May 2005
Krishna Bahadur
Machine Operator/ Supervisor
M/S. Emirates Glass Llc
P O. Box.29769
Dubai
U.A.E(united Arab Emirates)
Tel: 00971 50 8541740
Fax: 00971 4 3471440
I am aged 25 years having a nationality of Nepal,working in M/s.Emirates Glass LLC,Dubai,since 2000 to till date(6 years of experience).I am having full knowledge about architectuaral glass process like normal,shaped,stepped & safety glass having low-e and reflective coatings and able to analyse drawings, views etc., Currently operating LISEC insulating glass m/c line perfectly and also took the incharge of an acting Supervisor of IGU section.
In view of better opportunity, I would like to relocate immediately. Recruiters, please contact me at above address.
18 May 2005
Suriakumar Ramnath
Sales
Representative/consultant
Self Employed
313
Shannon Drive, Reservoir Hills
Durban
Kwa Zulu
Natal
4091
South Africa
Tel: + 27 031 2628714
Fax: +27 031 3032361
E-mail: reeni@dphs.co.za
I have worked for a plate glass company in Durban, South Africa. I have 4 years as inside sales and 24 years experience as a outside sales rep, 28 years experience in total.
18 May 2005
Ogunmodede Samuel Akinwale
Glass Technologist 1
Beta Glass Nigeria Plc
27 Oluwatuyi Road Akure
Akure
Ondo State
23434
Nigeria
Tel: 2348032252298
E-mail: samglass2@yahoo.co.uk
i wish to apply for the post of a Glass technologist in relevant vacancies in your companies.
i am ogunmodede samuel akinwale by name, a young man of 28, a nigerian citizen of ondo state. i hold an H.N.D certificate in Glass technology (with distinction from the federal polytechnic ado ekiti. i am also well versed in computer operations, applications and maintenance. kindly consider my application.
18 May 2005
Eugene Sun Isip
Sr. Designer / Team Leader
Philippines
E-mail: eugenesunisip@yahoo.com
8 years extensive experience in the Design and Engineering of Curtain walling and cladding projects in Dubai, Abu dhabi, Singapore and the Philippines; specialised in Unitised System.
16 May 2005
Trevor Lee
E-mail: tlee01@blueyonder.co.uk
Looking for work in the glass industry, currently had experience at Pilkington Architectural, St Helens, have experience in every aspect ranging from cutting glass to operating all machinery within the plant. Also spent 6 years as quality assurance, HND in QMS, Health and safety auditing risk assessment qualifications obtained also
16 May 2005
Rajendra B Deshmukh
E-mail: Rajendra.deshmukh@geind.ge.com
i am a diploma engineer in mechanical engg and have a 12 years working experience in glass industry in mechanical maint.field
16 May 2005
Ritesh
E-mail: rchampu@yahoo.co.in
Myself is basically an Electrical Engineer working in Electrical &
Instrumentation Dept.Of Glass Shell mfg.company.I have total 10 years of experience in Glass industries in the field of Plant Engineering.
16 May 2005
Florencio D. Ballesteros Jr.
Glass Technician
San Miguel Glass Plant
Binondo Manila
Manila
Philippines
1100
Tel: 09179855558
E-mail: fdballesteros@hotmail.com
I'm working in one of reputable glass plant in the Philippines, with 15 years of experience. Has knowledge in I.S. machine job change set-up, Forehearth and feeder control also assigned as line mechanic to deal with day to day mechanical problems in production line. Also has knowledge in bottle defect corrections.
7 years experienced in glass forming operation. Has extensive
knowledge in dealing with bottle defects problem and mechanical troubleshooting in I.S. Machine willing to be assigned anywhere particularly New Zealand.
16 May 2005
Orlando A. Yumuya
Engineer
San Miguel Manila Glass Plant
Binondo Manila
Manila
1100
Philippines
Tel: 0916-583-9413
E-mail: oyumuya@hotmail.com
Glass Forming Staff Engineer, has knowledge in I.S. Machine set-up, feeder forehearth controls, gob forming, I.S. mechanical trouble shooting etc. 9 years experienced in container glass manufacturing
16 May 2005
Dave Smythson
E-mail: davesmythson@hotmail.com
12 years operating experiance of b/b p/b and nn/pb still young only 40 years old very hard working.
9 May 2005
Jamal Kanaan
General Observer
Soliver
Chwaifat
Beirut
00961
Lebanon
Tel: 03579825
E-mail: jamalco-00@hotmail.com
My name is jamal kanaan,and im a micanical engineer and
im working now in a glass factory which produce glass containers of all sizes. i have 8years experience in mould department 5 years as head of this department and 3 years as mould controller,which means the moulds must be controlled before send to the machines, and now working in the same
factory as general observer.
4 May 2005
Ajmal Farooq
E-mail: talhafarooq74@yahoo.com
i have gained considerable knowledge and professional/ industrial experience of several years from1197 to date in well established Quality Control department of reputed and large industrial organizations engaged in the production of modren glass container in pakistan.now adays working with balochistan glass limited as sr quality control officer.
4 May 2005
S. Sacttivel
Senior Technician
Al Tajir Glass Industries
Dubai
Post Box No: 28862
UAE
Tel: 00971507385138
E-mail: SAKTHIANAN@HOTMAIL.COM
I am working as a senior technician in electrical and
instrumentation. i have 13 years experiance. i have well knowledged in plc programming, bench calibration, power distribution, electronics servicing in drives and electrical peripherals.
4 May 2005
Raj Kumar Gupta
E-mail: rajan3348@yahoo.co.in
I am a mech. Engineer with over 37 years experience in
various reputed glass container manfacturing companies out of which 14 years overseas in senior Technical positions especioally in I.S. maint, recently returned from Nigeria. With wide experience in maintenance mechanical, electrical, instuments, civil ,workshop, I.S. machines mech. &
electronic operated S/G ,D/G,T/G also looking after compressors, blowers, conveyors, & project, planning, erection, commisioning of different type of equipments
So I can take challanging job in Senior Honrary position for solving any problem in container glass plant & confident of increasing production with improved quality & reduced cost.
Intersted in taking C& F agency for any product for India/Middle
east/Africa.
4 May 2005
Edmundo Ramos
Glass & Aluminum Designer
Philippines
Tel: 00639154474248
E-mail: ehdram2005@yahoo.com
I' m a BS business Administration with Architectural Course graduate with 6 yrs experience in Archi Mechanical Designing of External aluminum & Glazing Fascade of high rise building in UAE.
Project Handled and designed as follows: Emirates Tower, Abu Dhabi Trade Center, Lease Office Bldg in Jebel Ali, Reef Mall, Dubai Central Prison, Al Moosa Tower
2 May 2005
Avinash
Project Engineer
Thane
Maharashtra
Country:
India
Tel: 09322505924
E-mail: avinashindulkar@yahoo.com
I have 8 years experience in construction for automobile line
furnace (contineous carburising furnace, batch type carburising furnace, seal quench type furnace, endo gas genterator, tempering furnace, rotary furnace etc. On this experence can I get the job in aboard countries.
2 May 2005
S. Sacttivel
Senior Technician
Al Tajir Glass Industries
Jabel Ali
Dubai
Post Box: 2882
UAE
Tel: 00971507385138
E-mail: SAKTHIANAN@HOTMAIL.COM
I am working as a senior technician in electrical and
instrumentation. i have a good performance in power distribution, plc programming, process control technic, bench calibrations of various instruments and i have a sound knowledge of electronics servicing as inverter drives and electrical periperals.
29 April 2005
Joseph C. Cameron
E-mail: sunnieside50@yahoo.com
To: any and all glass companies looking for an experienced glass container "jack-of-all-trades".
From: joseph c. cameron
I am interested in any employment oppurtunity involving the manufacture of glass containers.
I have over twelve years of experience in the glass production process. most of my time was in the forming dept., followed by feeders and furnaces.
I also spent a few years running a shift
29 April 2005
Paul Dennis
Machine Operator
Consol Glass
E-mail: pauldennis325@hotmail.com
I am a 30year old machine operator at consol glass south africa. I have 8 years experience in the glass industry willing to work anywhere in the world to gain more knowledge about this wonderfull industry. We have i.s machines running b/b p/b nnp/b worked on wide mouth p/b for 5years. i am a nqf level2 machine operator. I am married with 2 children we have our passports just waiting for an answer. I am a hard worker with sober habits
very eager to learn as much as possible. Give me a chance please
29 April 2005
Mukesh Motivaras
Furnace Technician
Gujarat Guardian Ltd
Kondh
Ankleshwar
Gujarat
393001
India
Tel: 0091 9824939517
E-mail: msmotivaras@yahoo.com
i have 11 year experience in float glass company and i have also experience of 5 month of gulf country in glass.
26 April 2005
W. F. Ibrahim
Commercial Manager
Cairo
Egypt
E-mail: waliedibrahim@yahoo.com
I am an Eng. Working in glass field since 1990 in float line and
also glass processing factories as commercial manger looking to work in the same in middle east area.
26 April 2005
Abdul Mohammad
E-mail: zaahid94@hotmail.com
Application for the post of Production Manager /Operations Manager/Plant Manager
I am on look out for better job opportunities at senior management level. As an experienced Production Manager with Bachelor of Mechanical Engineering Degree, I am confident that I would be able to contribute to the profitability and success of your business. I have more than two decades of production experience in the fields of glass processing, hot glass forming works , structural steel fabrication works and machining centers and I am interested in bringing my skills, talents and experience to your company.
My history of success in production is evident from the accompanying resume.
Presently I am holding B-2 visa status and I would appreciate if I am given the opportunity to meet with you to discuss your company's goals and how I can help you achieve them.
26 April 2005
Gena Hincu
Production
Holiday Essence
Rulmentului 106b
Suceava
Romania
72072
Tel: 0040230420029
Fax: 0040230420029
E-mail: genahincu@gmail.com
Engineer, specialised in glass technology 20 years experence fluent english,french italien tray to find a job according with my experence in dubai
26 April 2005
Sadeghi Majid
Tehran
Iran
E-mail: negin_sorkh2003@yahoo.com
i am iranian and i have worked hand maeding glass industry
now i want to work in italy i need jab. i worked since 1992
22 April 2005
David Valentin
Glass Painter
Viitorului
Buzau
5100
Romania
Tel: 0400727982477
E-mail: cristinadascalu2004@yahoo.com
I'm a glass painter and a designer with 15 years of experience how looking for a job in:
-enameled glass
-metalised glass
-tip Galle
-Tip Daum
-optic glass
-stained glass
-fusion glass
i know a little english and italian and i would go in another country for this job.
22 April 2005
LKR
E-mail: lkrama@yahoo.co.in
Well Known Glasstech is looking out for suitable consultancy job especially in Overseas
18 April 2005
Shiva Maddur
E-mail: shivamaddur@rediffmail.com
hi, i am shiva maddur, a graduate engineer in ceramics technology. I have around 14 years of experience in glass and related industry. presently I am working as manager (glass tech) in a reputed flat glass manufacturing plant in india.
I am certified Lead auditor in ISO:9001:2000 QMS. I have good knowledge of ERP SAP PP and QM module.
i am looking forward for better oppotunities in india/and abroad.
18 April 2005
Sahan Welandawe
Autocad Draughtsman
Colombo
Western
10400
Sri Lanka
Tel: 011-2701736
E-mail: sahancw@yahoo.com
i am a sri lankan working in a leading glass company in tempered glass. i have five years of experience in tempered glass trade using autocad for designing. i have knowledge of autolisp programming language so i can automate drawings as i wish as i am verymuch interested in it. i have done some several applications by my self for practice in the past few years.
15 April 2005
Michael Evers
15332 Willow Drive
Marysville
Wa
98271
Country:
USA
Tel: 360-652-7303
E-mail: extrusionator@yahoo.com
Michael Evers
Seattle, WA USA
Over 10 years in aluminum extrusion & curtain wall design, fabrication, QA & shipping. Core competencies include AutoCAD, Microsoft applications, 3D spatial relations, customer & vendor relations & organizational leadership. Looking for like-minded company in Pacific NW to dedicate my innate skills & abilities towards upward growth & future development.
15 April 2005
Aneesh Antony
Mechanical Engineer
Alu-tec
Doha
40625
Country:
Qatar
Tel: +974-4602334
Fax: +974-4602841
E-mail: aneesh_p_a@yahoo.com
I am Aneesh Antony working as a mechanical engineer (in contracts department) in famous firm at Qatar which is engaged in all glass, aluminium and steel works. Specialist in curtain wall works. Largest firm in qatar. I am looking for an opportunity abroad in the same field or related field. Basically form India (Kerala). Total Three year experience in all types of glass. (Glaverbel, Guardian, Pilkington etc..)
15 April 2005
K Pandian
Chemical Engineer
Asian Exports Intl
7/3 School 7th Cross Jafferkhanpet, Chennai-83
Chennai
Tamilnadu
600083
India
Tel: 0091-44-9381206669
Fax: 0091-44-52022793
E-mail: aei_india@yahoo.com
i am k.pandian, chemical engineer having exp in projects erection commissioning-chemical plants & glass wtp, etp, boilers,chilling plants, paints processing, design wtp, food
process machines fabrication, detergent making, safety,quality, iso 9000/14000 lead auditor,energy auditing
with leadership skills looking for immediate job at uae anywhere
residing now in chennai/ india
12 April 2005
Marco Mazzoni
Glass Industry
Via Donateschi
Fucecchio
Firenze
50054
Italy
Tel: +39 571 260399
E-mail: mazzoni_marco@virgilio.it
Hello my name is Marco 45 old with about 20 years of experience in Hollow Glass Industry. I worked on IS Machine like Emhart, Bottero and BDF. My experience go from maintenance, construction, regenerated IS machine and production glass container. Change mould, start-up and chief squad.
12 April 2005
Sayuti Samuri
Malaysia
Tel: +6019-3192510
E-mail: hide_xpert@hotmail.com
I have 4 years experience as Production Engineer (Forming
Department) and 4 years experience as Shift Superintendent at Kuala Lumpur Glass Mfrs Co. Sdn Bhd, Malaysia which produces glass container. As Shift Superintendent, I managed about 40 employees from various department (Batch and Furnace, Forming, Cold End and Quality, Packaging and Machine Maintenance).Education background in Mechanical Engineering and Business Management.
12 April 2005
P. Y. Rajesh
QC Engineer Glass
E-mail: rajeshpy4u@yahoo.com
My name is P.Y.Rajesh.I m a diploma mechanical holder and last 4 years I'm working with GSC Toughened glass Mumbai with QC Engineer. I am aware of all Glass Quality standerds ASTM, DIN and IS Standards, Looking for a good sutable position on same field.
12 April 2005
Sajjad Ahmed
Sales and Marketing/production
Bahrain
Tel: 00973-39270101
E-mail: sajjadch2@hotmail.com
i myself sajjad ahmed.i have 12 years of experience in glass processing industries as production incharge and sales and marketing. i am looking for an exciting job in the same field.
8 April 2005
Sajeev Kumar Shrestha
Civil Engineer
Lanku Pool, Bharatpur Municipality -5
Narayangarh
Nepal
Telephone:
977-056-525763
E-mail: sa5555523@yahoo.com
I am by profession civil engineer, i also have worked in galss fitting in aluminum frame for 9-storey building (Considered to be high in Nepal). I want to work in overseas so if any opportuity please contact.
8 April 2005
Houshang Bahmanpour
Scientific
Glassblower
E-mail: hbahmanp@hotmail.com
I am scientific glassblower with many years experiences in Canada and abroad.
I can work on bench and leath. Currently looking for scientific
glassblowing job.
31 March 2005
Marcin Suss-karwinski
Kazimierza Wielkiego 8b/28
Luba
59-800
Poland
Tel: +48 608601980
E-mail: msuss@tlen.pl
My name is Marcin Suss-Karwinski and I search job proposition for artistic glass designer in Italy. I studied art glass in Academy of Fine Arts in Wroclaw (Poland). I have 10 years employ experience.
31 March 2005
Matthew Tangeman
Ceramic/glass Engineer
1069 Harrison Ave
Columbus
Oh
43201
USA
Tel: 614-975-9062
E-mail: mrtangeman@aol.com
Batch & Furnace Consulting
Design, Construction, Operations, Materials Selection, Quality Improvement
Bubbling, Electric Boosting, Oxy-fuel firing, hot repair, heat up cool down, batch through hot end process improvement
29 March 2005
Narendar Sudan
I.t.i Fitter
Vediocon Naramda Glass
Baroda
Gujarat
390010
India
Tel: 0265-2631218
E-mail: narendarsudan@rediffmail.com
i am a i.t.i fitter working in t.v glass company from 9 years in forming maintance departmant their we have done maintance of heavy duty hydraulic press & barrel cam indexer press and also feeder , shear cutting unit , stud insertion machine and also maintance of hydraulic & pnuematice cylinder.
29 March 2005
Neeraj Krishandev Trihima
Assistant Manager Production
Videocon Narmada Glass
Bharuch
Gujarat
392002
India
Tel: 265-2641436
E-mail: neerajktrihima@rediffmail.com
I am a Mechanical Engineer having 12 years experience in Glass Industry , a continuous running plant having ISO 9002, 14001,18001 ,as a Assistant Manager managing Overall Finishing department activities i.e Grinding and Polishing glass panels used for Colour Picture tube assembly including latest technology- Lapping process. Well versed in managing and controlling shift activities, upgrading equipments, handling customer complaints, am computer literate and SAP R/3 as Functional consultant in Production Planning and material management module. I am interested in career in Glass Finishing/Salvaging process. For immediate joining
24 March 2005
Jamal
Mold Departement-head
Soliver
Chouwaifat
Beirut
Lebanon
00961
Tel: 03579825
E-mail: jamalco-00@hotmail.com
helo, my name is jamal kanaan,and i like to work in a glass factory,im an engineer in a glass factory right now and im the head of mold departement in soliver glass factory and would like to seek a new job and better incom in another country and another factory.
21 March 2005
Godwin Peter Makeri
Teacher
Government College Kaduna
College Road, Kurmin Mashi
Kaduna
2073
Nigeria
Tel: 2348033641793
E-mail: geepi2005@yahoo.com
my name is Godwin peter makeri. I am a nigerian by nationality. i read industrial design and specialized in glass technology in the ahamadu bello university zaria nigeria.i've been practicing flat glass design for the last 3years.i see there are lot of new innovations in the glass industries. i will like to get your links to a good glass industry so as to get an employment for a job as this will enable me to increase and enhance my skills and knowledge, I'll appreciate if this opportunity comes soon.
21 March 2005
Warrousse
Responsable Du Four
Sevam
Allèe Deslaguinarias Citè Sevam No.11
E-mail: warrousse@yahoo.fr
je suis responsable des services : composition et fusion dans une verrerie au maroc
j'ai 20 personnes sous mon autorité.
j'ai 45 ans
je travaille dans ce service depuis 1985
j'ai un dut genie chimique en france
j'ai effectue plusieurs stages dans le domaine du verre en europe.
21 March 2005
Richard Roberts
Glazer
2 Longacre Mews
Shrewsbury
Shropshire
SY3 5DT
England
Tel: 07917406433
E-mail: safefirm@hotmail.co.uk
Hello my name is richard. I am 31 years young and have 7 years exp in curtain walling and roof glazing instalation.I have installed diferent systems but mainly schuco.I have been out of the industry for the last 3 years doing roofing but would love to get back into the glazing, in britain or abroad. thank you.
21 March 2005
Adigun Dauda Gbola
Glass Processor/Glazing
Adgdecor
Pmb 64, Agodi. P.O, Km4, Iwo Road
Wofun Village, Ibadan
Oyo State
2342
Nigeria
Tel: +2348033902684
Fax: +23428104321
E-mail: adigund@yahoo.com
i wish to seek for job through your organisation,im a nigerian, i have about 16 years experience in the glass industry, i believe that my exposure in the different departments and sections of the glass processing can give me the opportunity of working and meeting the standard you might be needing for your members,
i can handle glass from cutting via grinding, drilling, tempering and even installations.
frameless doors, squash glass backwall, balustrades etc.
21 March 2005
R. Mohammed Ali Irfan
Plant Operator
(served) M/s. Gulfguard
E-mail: mairfan2002@yahoo.co.in
Iam experienced in Glass Industry for 8 YRS, i am well versed in TINBATH, FURNACE, PACKAGING & FORWARDING divisions, looking forward to serve you.
17 March 2005
Luis Alberto Garcia Luna
Product Design / Design Engineer
Monterrey
Nuevo Leon
66460
Mexico
Tel: 0152812298900
E-mail: alberto_gluna@yahoo.com.mx
Define all product concept design for glass products and identify product design alternatives.
Support marketing/sales teams, identifying customer’s needs and defining key Concepts and Product requirements.
Travel to international trade shows: Chicago House ware show, NY Tabletop and NY Intl. gift fair,Macef fair Italy, Tendence Intl. Frankfurter Messe; seeing tendencies and market place analysis.
Provide marketing/sales team with support materials (renders, pictures, 3D Models using Solid Works, Illustration work airbrush techiniques)
12 year experience in the glass industry
100% english spoken
17 March 2005
Vinod Kumar. J
E-mail: jvk71@yahoo.co.in
I am VINOD KUMAR.J first class diploma holder in ceramic tech. during 1989-94. And working with glass industry since 11years. presently iam with khoday glass company bangalore. iam working inshifts ,i can hadle the process in indivedual shifts ,ihave got experience in hot works , furnace erection,batch composition. I am working as a SHIFT GLASS TECHNOLOGIST.About my company they are leading liqior mfg. They also making glass bottles for there own as well as selling out side also. I am looking job in same concern india and international.
17 March 2005
Ruedi Van Rensburg
London
UK
Tel: 0044 0 77 4369 3363
E-mail: rvanrsa@hotmail.co.uk
My name is Ruedi van Rensburg, i am currently employed by Leventis-Overseas limited (holding company for Frigglass) I have specific responsibilities for two glass plants in nigeria, providing an effective procurement service and logistics for their imported needs according to their requirments.
I am seeking a position with in the glass industry in a similar role. All opportunities will be considered within the glass industry.
My strongest attributes are my ability to communicate well, negotiate and make decisions. I am highly motivated, thrive on responsibility and am well equipped to both set personal deadlines and meet those set out for me. I am young, dynamic & hard working, eager to learn and adapt easily to changing scenarios. I am seeking a position that will assist in achieving my goals in Purchasing Procurement & Management.
14 March 2005
Tariq Mehmood
E-mail: tariq_mehmood204@hotmail.com
my name is tariq mehmood of 42 years aged working in saudi arabia in automative glass manufacture factory in riyadh as production supervisor last 10 years., i need suitible post in the glass factory pakistan only.
14 March 2005
Nadeem Hani
E-mail: sicosico2020@yahoo.com
Am chemical engineer, 43years old & working in glass plants sice 18years and now am looking for a job of quality &customer service manager in the middle east area.or quality assurance manager
11 March 2005
Kamoru Kayode Akinpelu
Aluminium Fabricator
Kbm Aluminium
Lagos
2341
Nigeria
Tel: 2348055616512
E-mail: kbmaluminium2000@yahoo.co.uk
MY NAME IS kamoru kayode Akinpelu and I am interested in
training or employment with your prestigious organisation. i am from nigeria .I am also willing to relocate. I have been in the Aluminium and glass glazing fabricator industry for 12 years. My accomplishments are in the area of Quality management at KBM ALUMINIUM NIG. ENTERPRISES, a window manufacturing company. I have been an asset to this company for 12years. I have issues in the area of quality that are motivating me to seek employment with another company.
NAME : kamoru kayode akinpelu
CURRICULUM VITAE
LANGUAGE SPEAKING : ENGLISH : YORUBA : HAUSA, and little' FRENCH
I am familiar with technical aspect surrounding fabrication machine tools/ctter change , etc
I have experience in the field of PVCU EXTENSION
11 March 2005
Prasad B Nair
Glass & Aluminium Fabricator
A.k Fabrication
Keerthi Sthumb
Vadodara
Gujarath
390001
India
Tel: 91+9898435259
E-mail: ak_fab_prasad@yahoo.com
I'm working since last 4 years as an glass fabricator and aluminium fabricator. I ready to work in any country.
9 March 2005
Slawomir Turek
Helper Of Line' operator, Glass Inspector
Celt Glassa
Cielmicka 44
Tychy
Slask
43-100
Poland
Tel: +48 505 224 415
E-mail: slawomirturek@op.pl
27 years male Poland, economic education, work on various position production
protection, agriculture, lead small company. Glass indrustry last two year: Insulating glass line; glass control, washing machine. For four month glass process i help at polishing, drilling, tempering. I am interesting in to work in glass indrusty.
7 March 2005
Czop Lech
Master Of Glassblower
Poland
Tel: +48607309487
E-mail: juraczan@interia.pl
My name is Lech Czop, I'm from Poland.I have been working as a manual glassworker for 30 years. I have been working on a
possition of master of glassblower. I'm looking for a job in glassworks in Czech Republic, Germany and Sweden
7 March 2005
Ebrahim Mohamed
Melting Superintendent
Consol Glass
160 A St Kilda Road
Cape Town
Western Province
7780
South Africa
Tel: 0825721733
E-mail: emohamed@consol.co.za
I have 5 years experoience in the glass industry working for Consol Glass in Cape Town ( packaging). I have a chemical engineering diploma and currently completing a programme in production/operations management.
I would like to share my experience and expertise within your glass factory.
25 February 2005
Rajendra Kulkarni
Manager (mold Mfg.)
Gujarat Glass Pvt. Ltd.
Kosamba
Surat
Gujarat
India
Tel: 09426841764
E-mail: rykulkarni@sify.com
i am rajendra kulkarni, DME & having vaste over 15 years exp in glass mould manufacturing,repairing & online rectifications & troubleshootings.
presently working as Manager(mold mfg.) in a reputed ISO app glass industry GGPL situated in south gujarat.
25 February 2005
Karhtik
Glass Blower
143 Amutham Nagar
Mayladuthurai
Tamil Nadu
609118
India
E-mail: karthicmail@hotmail.com
I am a diplom holder in glassblowing i want a job with related to this industries
23 February 2005
Chris Screnci
Tel: 450 753 7769
E-mail: bluenose16@hotmail.com
ive been in the glass and aluminum industry 15 years where ive aquired a vast experience such a project manager estimator architectural rep coordinator etcwilling to relocate looking for serious company please contact me
23 February 2005
Ajmal Farooq
Sr.quality Control Officer
Balochistan Glass-ii Sheikhupura
Lahore Road
Sheikhupura
Punjab
54000
Pakistan
Tel: 056-3406711-13
Fax: 0563-406712
E-mail: talhafarooq74@yahoo.com
Looking for job in quality control or quality assurance department regarding container.
23 February 2005
Paul Dennis
Machine Operator
Consol
Sacks Circle
Bellville
Cape Town
8000
South Africa
E-mail: pauldennis325@hotmail.com
my name is paul dennis currently working for the last 8 yrs at consol in south africa . my experiance includes p/blowand b/blow processes.
iam a hard worker and would be a asset to any company. i would like to increase my knowledge in the industry .i have a nqf level2chemicals and best operating practicess certificate.we are currently working on o-i double gob machines would like to work on emhart our technoligy is very good but we are limited to work on the equipment .i am busy applying for working permit.iam married with 2 children .please allow me to be a asset to your company.
21 February 2005
Tapasbrahma
Sr Manager -glass
Agi Glaspac,india
Off Glass Factory Road
Hyderabad
Andhrapradesh
500018
India
Tel: 04055346701
E-mail: tapasbrahma@rediffmail.com
Being a BTech in Ceramic Technology from calcutta university, having a wide experiences of more than 15 years in various leading sheet,tvglass,container(flint,amber,green) glass manufacturers & refractory manufacturers at different managerial positions.Having a well exposure of working in furnace commissioning/rebuilding of corning & sorg design alongwith their experts. Doing mba now. seeking a better oppertunity in professionally manged organisation in glass& refractory industry
16 February 2005
Josef Marek
E-mail: pepikm@yahoo.com
M.A.Josef Marek - Glass sculptor,designer,experienced in cold work and glass casting, 6 years teaching experience looking for a job in EU.
16 February 2005
Intezar Ahmed
Manager Q.a/q.c
Karachi
Pakistan
Tel: 0333-3168736
Fax: 0092-21-5056039
E-mail: intbinahmed@yahoo.com
I have 25 years experience in quality control and quality assurance in glass industries . I can manage iso 9001-2000 and establish the procedure related to I.S.O. I do expect any short term or long term professional job apportunity in abroad or in my country Pakistan.
14 February 2005
B. Raja
Tel: 022-25420720
E-mail: braajaa@yahoo.com
I am B.Raja. I am 47 years old. I am a B.Tech chemical engineer and I hold a Diploma in Management Studies.
I've worked with Fibreglass Pilkington Co. for 8 years.
I've also worked with Float glass India Ltd., as Production manager for 7 yrs.
I am in the lookout for a job in a senior managerial position anywhere in India or abroad.
14 February 2005
Chandran Ramasamy
Sandblaster Glass
E-mail: zheandren@hotmail.com
My name is Chandran and I have 10 yrs of experince and do any type of sandblasting and drawing, so please help me to find job in this glass companys.
14 February 2005
M Wasif Farooq
St#9sadar Bazar Near Al-farooq School
Faisal Abad
Pakistion
38000
Pakistion
Tel: 041719534
E-mail: wasi786w@yahoo.com
I am glass designer.please i am searching for a job. I have 4 years experience in glass designing. I can design stain, frosting, marble, etching, chipping glass
9 February 2005
B. Raja
E-mail: braajaa@yahoo.com
Seeking job for a senior manager in glass industry.
qualification: B.Tech chemical Engineer and D.M.S.
Experience in Fibre Glass: 8 years
Experience in Float Glass: 7 years.
9 February 2005
Craig Strachan
Glass Processor
Oaklands Grove
London
W12 0JB
England
Tel: 07786934705
E-mail: straunytraveller@hotmail.com
I have six years experience in glass processing as well as quality control and production co-ordinating. Looking for a job in London area in glass industry. Familiar with Lisec, Bavelloni, and have undertaken a short training course with Intermac in Italy.
9 February 2005
Eby Mathew
Senior Sales & Marketing Officer
Gulf Glass Mfg. Co. Ksc
Safat
P.O. Box. 26996
Kuwait
Tel: 326 3136
Fax: 326 0456
E-mail: e_mathew70@yahoo.com
Have more than 10 years experience in Sales & Marketing field (Glass Containers).
Looking for a suitable placement.
7 February 2005
Mr. Sunil Mahadeo
Mumbai
Maharashtra
401105
India
Tel: 00-91-22-28144492
E-mail: karunasun@yahoo.co.in
I am 5th July 1970,Mumbai born Dip.Mechanical Engineer,having 8 years experience in production of OPAL/FLINT/BOROSILICATE glass Tableware/Kitchenware/Ovenware,with Hydraulic/Pneumatic Presses & Spinning M/C.Also familier with Float Glass Processing machineries like Crystal Edge/Bevelling/Moulding/Bending/Engraving/Fusion/Engraving.
My Employers List is as follows:
1-Premier Glass(P)Ltd. MUMBAI, as Production Manager.Presently working & fully responsible for the production/Upkeeping of the whole unit.
2-Mahfam Jam Co. IRAN, as Production Technician for 8 months from foundation to finished Opal Glass products.
3-RAK Glass Co. UAE, as Production Incharge for 5 years from foundation of this Opal/Flint Glass factory.
4-Borosil Glass Co. INDIA as Shift Production Engineer for 18 months.
5-H&R Johnson LTD. INDIA as Trainee Engineer for 6 months.
I do expect any short term/long term good JOB APPORTUNITY.
7 February 2005
Achu Renis
I Wish To Be At Your Services
Novicam
Bonaberi
Douala
Littorial
00237
Cameroon
Tel: 00237 786 81 08
E-mail: achurenis@yahoo.com
i am young Cameroonian . 25 yrs i got 11yrs experience with glass and aluminium company in my country .i belief i can serve the world glass and aluminium company.
7 February 2005
K. Jothi Ramalingam
Sales Officer
Majestic Colony, Valasaravakkam
Chennai
Tamilnadu
600 087
India
Tel: 091-09382662724
E-mail: jothi_s2003@yahoo.com
i am jothi ramalingam from chennai, i have sales expereince more than 7 yrs.on this i have 3.5 yrs sales experience in glass field.
(saint -gobain glass india ltd)
my contact mobile ph no is 09382662724.
31 January 2005
S. Hari Kumar
Manager (production)
Glass & Glazing Systems(p) Ltd.
Ara-b-18,t.c.6/1353
Trivandrum
Kerala
695013
India
Tel: 0471-2362721
E-mail: hks_kumar@yahoo.com
I am a 34 year oldmechanical engineering Diploma holder working as Manager(Production) in a glass tempering unit in Trivandrum, Kerala. It is the one and only plant of its kind in whole kerala. Looking after all the activity from cutting the glass, processing and delivering the product in tempered state.
Working for the last two years and right from commissioning associated with the company. Now looking for a better job.
31 January 2005
Randal Davis
Upkeep
Arkansas Glass Container Corp.
E-mail: brande@cox-internet.com
Journeyman machine operator, experence, upkeep,job change crew, operater. doulbe, single, press,jp5, lynch, floorboy.17yrs exp. at arkansas glass container corp.
27 January 2005
Sophie Hoyt
1 Diprose Cottages
Hinksden Lane, Benenden
Kent
TN17 4LE
England
Tel: 01144 7780 766 127
E-mail: sophiehoyt@hotmail.com
I am looking to move to Colorado, and be an apprentice for an established glassblower and kiln caster (preferably in the durango area, but anywhere in CO is wonderful). I am only just taking my first course in glassblowing, and am eager to learn from somebody who wants to teach! I have some great ideas, and need to learn from somone who is passionate about what they do. I am English/American and hold both passports, so visa's are not even a thought. Come on, who wants to pass on some knowledge?!
27 January 2005
Vikas V Rajput
Glaze-line Engineer
Sun Earth Ceramics Ltd
Balaji Darshan Apts Room No 104
Neral
Maharashtra
410101
India
Tel: 9850214503
E-mail: vr_ceramik@yahoo.co.in
i am serving sun -earth ceramics as a glaze line engineer in the envirnment of italian technology foro itly for two years besides this i am responsible for daily production targets with quality parameters & corrective & preventive actions taken in the case of any non- conformities as well as waste controling & scrape reduction.
27 January 2005
Okechukwu Joseph Nnoli
Asst Manager
Glass Ind Nigeria
34 Clifford Road
Abia
234
Nigeria
Tel: 234-82-223491
E-mail: okesonbiz@hotmail.com
iam a nigerian who have worked 5yrs in glass industry in nigeria i need to work abroad to expose my skill.
24 January 2005
Syed Wajid Ali Shah Bukhari
Aluminium Fabricator And Glass Cutter
Ali Aluminium And Glass Pakistan
New Jhang Manga Road Dina
Jhelum
Punjab
49400
Pakistan
Tel: 00923005424988
E-mail: alialuminiumandglass@yahoo.com
I am aluminium and glass fabricator having 10 year exprince in aluminium doors and windows , i am working in dubai (UAE)
MY nationality is pakistani. want a job of glass cutter.
24 January 2005
Alade Saheed Abiodun
Factory Worker
Midas Glass
Alluminium Village
Suleja
Niger
234
Nigeria
Tel: 08036246054
E-mail: saheed4real9@yahoo.com
i am alade saheed abiodun,looking for employment in any of your company. i am 18 years old ,i have an experience of 2 years in a local conpany in my country i am willing to know more about the job and i will be grateful if you can please consider me.
17 January 2005
Narayan
Chemist
B-303 Swastik Apartment
Mumbai
Maharashtra
400 042
India
Tel: 91-022-25679682
E-mail: iyer_narayan2001@yahoo.co.in
I am having experience of 13 years in quality control in glass industries and also in production of glass in India, seeks good placement interested to work anywhere in same field or in production/furnace/etp.
13 January 2005
Sarah Hamilton-parker
Self-employed
Rfd#1
Lyman
NH
03585
USA
Tel: 603-838-5908
E-mail: s_hp25@yahoo.com
I am searching for employment in the stained glass industry, specifically studio work. I have learned leading, painting, copper foil, and some restoration, but am currently looking to expand my knowledge, and am more than willing to travel for the right job opportunity.
13 January 2005
L.K.Ramaiah
E-mail: lkramaiah@rediffmail.com
I am a highly qualified and rich experienced Glasstech based in India with 35 years experience behind me and am well known throught out Asia and have worked as consultant with many factories and have set them up.
I am currently looking for a challeging role either in a active glass container unit or working as a consultant in setting up one in overseas.
10 January 2005
Tillie Burden
E-mail: tillieburden@hotmail.com
I am an Australian, currently travelling the UK. Looking for a job as an assistant glassblower in a studio in either the UK or Europe. I have finished an applied art degree with a major in blown glass, and have had 1 year work experience since graduation. I am hard working and keen to learn all I can
5 January 2005
Gurupadappa Khapate
Ceramic Engg
Tel: +919448100167
E-mail: khapateguru_700@yahoo.com
I have ceramic engineering degree. I am interested in training or employment with your prestigious organisation. I have issues in the area of quality that are motivating me to seek employment with another company.
3 January 2005
Joshua Bailey
Hot End Technician, Lead Man
Guardian Industries
E-mail: bucksbigcountry@hotmail.com
i am presently employed by one of the top float glass producing companies in the world. i have seven years experience including packing, cutting, tempering, coating, and hot-end (furnace) experience. I am also a lead man, or fill-in supervisor. I am experienced and skilled in the annealing process, as well as the batching and refining areas. I have been a hot-end technician for almost four years. I currently live in California, and am looking for oppurtunities to relocate or to find a company that desires self motivated individuals desiring the chance to move up in their company and continue to improve the float process.
3 January 2005
Mazhar
Stain Glass Designer
Mirat Ltd
3, Saidham Society,
Near Kokanipada,
Malad - (E)
Mumbai
Mah
400 - 079
Tel: +919892973371
E-mail: macsd143lot@yahoo.com
I am a Stain glass Designer, working in a reputed firm from 5 years in india, currently looking for a job in dubai for the above mentioned post.
3 January 2005
Vikas Samir Mehta
Asahi India Glass Ltd
Maharashtra
India
E-mail: vikas523@yahoo.co.in
chemical engineer with business management qualification. experience in float glass manufacturing (asahi india glass ltd) for last 10 years. worked in cutting & packing, raw material handling, batch house & furnace operations.
Enter your message in Employment Wanted
|
